I am trying to setup a VPN to windows server 2003. I have it all configured fine on the server. The problem is getting it to work through the router.
Here is the complete diagram to my ne...
I support a network that is setup a lot like this example: ( http://www.experts-exchange.com/Networking/Misc/Q_21105296.html?sfQueryTermInfo=1+172.16+255.240.0.0+privat )
172.16.1.x for route...
I'm trying to configure this 2620 router to route all WWW traffic to the WIC-1ADSL card and all other traffic through a Serial0/0 that uses a dedicated T1 to a remote site.
Am I close?
v...
Hi,
I would like to setup a DHCP server for Avaya IP Phones. The PCs would be connected in a daisy chain(Switch connected to Phone and then to PC). The phone is using 192 subnet while the PC ...
This 2821 router has been shut down for a couple of months and I'm trying to get back into it. I'm plugged into the console port and after it boots it comes to the message below. I hit return ...
Hello,
We recently purchased a Cisco ASA 5520 and are having some problems with traffic to sub interfaces. Here are the details:
There are 4 gigabit interfaces on the ASA - they are con...
Hey everyone i just got my aironet 1200 in the mail (bought from ebay) and when i try to access it though the console cable... it doesn't give me a prompt.. i can see it booting and the ip add...
I'm new at this so I appologise if this is something basic that I've overlooked.
I've set up an HP 2626 switch with 2 port-based VLANs but I cannot get the internal routing to work correctly....
I have a linksys WRT54GL V1.1. I am thinking to use the DD-WRT. I checked their download page, there are so many download links there, really confused me. Can any one tell me which one I need ...
Hello Experts!
I have a cisco 2600 router in my offce. I need to limit the inbound and outbound traffic of a public ip address i have configured. Is there a way to do this from the router ...
I just purchased a Cisco 2811 ISR with a VWIC2-2MFT-T1/E1 card. When I do a Show controllers all I see is FE0/0 and 0/1. I have a T1 and 1/2 T1 that I need to connect for internet access. Any...
Several of my company's staff are at a trade show and trying to access our corporate network using VPN. We use Cisco VPN client on all of our laptops and we have a Cisco PIX at our HQ offices...
Well.....Someone installed a Cisco wireless access point and does not remember the password they set for it. Does anyone know how to just reset the passwords. I do not want to reconfigure th...
We have a CISCO 3550 with several ports that have a status of "Port is error disabled". Is there a way I can clear the error to make the ports usable again without restarting the switch?
I...
Hi All
I need to configure a 2MB E1 connection from router to router for some testing and would like to know if I have the correct configuration bellow. I havent had the chance to try this...
Below is an output fromthe cisco router that i am using in a lab. It is stuck on the rommon> screen and i am not able to reset it to load from 0x2102.
>>>>>>>>>>
System Bootstrap, Vers...
Hi. I have a Cisco 2600 Series Router, running IOS 12.1(5)T12. I am trying to enable SSH connection on the router so that I can ssh from my PC. However when I tried to create the RSA key wi...
I am trying to add a static route:
route add 10.0.0.0 mask 255.0.0.0 10.1.1.10 IF 1
I get this error message:
The route addition failed: Either the interface index is wrong or the gatew...
I am having a problem with my laptop connecting with my wireless router. It will only connect me to an access of "Local Only" and doesn't allow me to go on the Internet. I know it is my actu...
i have a speedtouch 530 adsl modem router with a default ip of 10.0.0.138. i would like to change this to 192.168.0.1, can anyone help with this.
I have a router Huawei EchoLife HG520s, and I need a script, exe or batch file to reboot it automatically, in order to use it with other program to get a new ip automatically each 45 minutes.
...
hello i we have a cisco 1841 with with HWIC-4ESW .
i would like to set up a vlan5 (192.168.200.0) i would like traffic on this vlan to be able to reach our existing network of 10.17.18.0 a...
a problem is preventing windows from accurately checking the license for this computer 0x800700c1
I just started getting this error last night. It will not allow me to log in. I can log i...
we have a T1 and currently have 30 users in it, and we are killing the bandwitdh, what i have found is that some of the users are playing radio, i would like to block all radio or most radio p...
Hello experts.
I have a fairly easy question although I have not been able to figure it out. Recently someone infiltrated our LAN and they were broadcasting out on SMTP port 25. Needlees to...
