I've been using my new Netgear DGN2000 wireless modem/router for a couple of weeks now and have attempted to setup Address Reservation on the LAN web page. I have a number of devices that con...
Hi All,
What is the proper way of setting up a WORKGROUP Network?
Is it necessary to have the same username and password on ALL pc's that will be n the same Workgroup network? Regardless ...
Hi,
I am looking to configure a Cisco 1841 Router to perform load balancing between two ADSL WAN connections. All clients and servers will be natted with the servers being static natted on ...
FIrst time CISCO router buyer. I am trying to setup CISCO 851 router. At first I did the setup at home on a desktop and had no problem getting to SDM and Easy setup page. When I took it to the...
Hey all router gurus.
I have got this cisco 3660 router. It has got 6 T1 slots.. I need to configure one of them.
What I am planning to do is to configure that T1 interface (giving static...
I am trying to upgrade my IOS to (c2801-advipservicesk9-mz.124-25a.bin) from (c2800nm-ipbase-mz.124-15.t7.bin) through my tftp server... i just got the connectivity for my tftp server but when...
Is there any command or script to completely shut down cisco switch in case of emercency..?
thank you
I've recently discovered a couple of dusty Cisco 1700 series routers in a cupboard at work. I was thinking of using them to try to learn a little about the Cisco IOS, but I need to restore th...
Folks,
I have noticed several EE posts on this topic (and others outside EE) but I cannot seem to find a definitive answer on the topic of running a "load balanced / split load" setup using...
CCNA Exam - Hello all.. I am looking for a compaion to the lab setup I have to practice for my CCNA exam. I have a home lab but need some exercises to run and practice with but I would like if...
I just got a D-Link DIR-655 Extreme WiFi Router and replaced my old netgear with it. My connection to the internet is stable and does not drop, but my work VPN connection will authenticate, ...
I don't know if I'm missing the obvious...
I have a router that I want to use for the internal home network. It is a Netgear FVS318. Comcast is my ISP, and I have a Motorola SBV5220 Surfboa...
Hello,
I have a problem with the wireless on the DI-524 router.
Problem is, the router will keep restarting while wireless is on. unless I keep a ping running to the router.
When the ...
I am running a small network of about 15 users through using a verizon wireless PCMCIA card in a linksys wrt54g3g-st router. I am having a lot of trouble with the users streaming audio and vi...
I've a Cisco 877-M router, just wondering why does the NVI0 interface always remain in shutdown state. I've just configured the router and not plugged in the ADSL link. Upon show ip int brief,...
The facts:
- Connected to the wireless router I have a wired desktop pc and a wireless notebook;
- Only the desktop downloads torrents and play games, the notebook just surf the internet a...
I need to route 1 LAN to 2 different ISP's. Once is ADSL and the other is a T1. I have static IP's for both ISP's. I need to have the VPN use 1 interface and all Internet traffic use the other...
we are trying to get any info on the new Cisco 890 (not 880) series ISR routers.
basically what we are looking for is an ISR router with build in 802.11n, a Docsis 3.0 (not 2.0) HWIC + Avan...
Hello -
PIX501 - Ver 6.2
Needing to make a copy of the running config in the event of failure of course... :)
Was not able to find a thing on copy run tftp for a PIX-- i see that using ...
Hi Experts,
I am in charge of a Network with 30 users in our Head office, 2 smaller branches with 5 users, and another branch with 10 users. Each branch is connected to our office via site ...
We are having intermittant but persistent network problems on a small LAN with a Cisco 2800 router as the edge device/firewall.
NETWORK OVERVIEW:
10 PC's, no servers, most unit hard-wi...
Hello again,
Can someone walk me through for configuring the Windows server 2008 NPS as a Radius server with Cisco Router as its Client. ?
I am following the
http://www.mcmis.co.uk/TechA...
Hi Everyone;
I am wondering what are the advantages of having a dual-band wireless router which transmits at both, 2.4GHz and 4GHz. Are there more channels? For instance, I have u...
Here is my situation, I have 1 Dell Powerconnect 6224 Layer 3 switch and 4 3448 Dell Power Connect Switches. I am trying to create multiple VLANS that are routable. In testing I have set up VL...
Hi,
I am trying to map a local drive to a WAN server using Windows file sharing. I can not use VPN as I am on win XP 64-bit and cisco does not have a 64-bit vpn client. I must mount the drive...
