[x]
Posted via EE Mobile

Search, ask, and monitor your questions on the go with EE Mobile. Visit Experts Exchange from your mobile device and never be out of touch again.
Question
[x]
Attachment Details

On A Cisco Stack - How To Change The Config On A Member

Asked by ItTechNC in Network Management, Networking Hardware, Network Switches & Hubs


Here is my scenario - I have a 3750 stack with two switches.
The "member" switch was power cycling on and off this morning.
I have SNMP traps established, but of course the "config" is running from the "master" switch.

When I "session" into the "member" switch - issue a 'show run' - while it displays the 'config' - there is no directive set for 'logging' and 'snmp-server' settings.

So while "sessionED' into the "member switch" can I tell/config it to send SNMP traps to our SNMP server?
[+][-]11/05/09 10:21 AM, ID: 25752293Expert Comment

At Experts Exchange, members can ask their questions to thousands of technology professionals, also known as Experts. Experts compete and collaborate to answer those questions by leaving comments like this one.

Start your 30-day free trial to view this Expert Comment or ask the Experts your question.

 
[+][-]11/05/09 10:52 AM, ID: 25752601Author Comment

Often, when Experts are collaborating with members who have asked questions, they will request additional information about the problem. Askers respond with an author comment like this one.

Start your 30-day free trial to view this Author Comment or ask the Experts your question.

 
 
Loading Advertisement...
20091111-EE-VQP-92 - Hierarchy / EE_QW_3_20080625