Where possible to find Isscbta Bluetooth Driver windows xp service pack2 already installed
Hi,
I have a Cisco 1841 left behind by the previous IT guys. They've only left a password with view level permissions and are uncontactable.
Does anyone know how to reset it to factory d...
Hello,
We have a network composed of:
1 Linksys Router
2 Linksys Wireless Access Points (Not Routers)
2 16-port 10/100 switches
We recently needed to open a port on the router, and di...
I need to configure my router to connect to an ISP providing cable Internet. The ISP has given me a static IP, and claims that they only need a MAC address from me in order to supply Internet....
I'm looking for a DOS driver for a Intel 82567LM Gigabit NIC. I'm trying to image a new PC that has this this nice card but I cannot find a dos driver for this NIC card. Including Intel's site...
Hi,
I have a Laptop (given by my company and is joined to my company domain) running Windows XP Professional with SP3. And I have my desktop which is running Windows 2000 Professinal with ...
I am designing/installing a network for a client. They require a Office VLAN (192.168.1.0/24) and a Guest VLAN (192.168.2.0/24) which get IP addresses from 1 DHCP server. They also require a...
Could you help me find the way to reset D-Link DP-301P+?
Because there is no reset button on the device.
Thank you.
Hello,
I'm trying to upgrade my WRT54G2 v1 device from the DD-WRT.com website, but can't seem to find the download. Can someone help me.
I have a D-Link DI-523 router. I want to activate remote management so that I can access the GUI interface and configure it from anywhere. I toggled remote management on and set the port to ...
Hello experts,
Ive been trying to research for an answer to a simple question but cant get a concise answer.
What is a cisco cco account? What does it imply? benefits of having one? and...
I have virgin cable broadband which is currently connected to the N1 Wireless Router (Part # F5D8231uk4).
Every PC in the house (7 PC's) are going to have a Gigabit Desktop Network PCI Card...
Problem: I have attached a console cable to the console port in order to program the device fron the IOS interface, I am using Hyperterm for this. I am not able to get the IOS interface to res...
hi expert.....i m having a cisco 3750 switch and i m on enable mode...but i dont know the password....now i want to change the password....so tell me how i can reset password ...?
plz with f...
A colleague has asked a question about some discard rates he is seeing on one or 2 switchports. they have surpassed a threshold limit of 10%.
Can somebody tell me what are all the possible...
I have the mac address of my stolen laptop. It does not have any tracking software pre-installed in it. Is there a way that I can track the mac address when the laptop goes online anywhere??
We are looking into moving to VoIP to connect our 3 locations and each of the vendors we have looked at quoted the system with layer 3 POE switches. Once we negotiate further they have all be...
Hi There,
Here the scenario: Two Radio links between two sites - one Bridgewave microwave and the other Orthagon standard spread specrtrum.
The Microwave is a Gig link and the Orthagon is ...
I had a cisco 678 modem that (end-of-sale). I have a replacement for it cisco 877 that I am trying to config but could not get it to work. (the isp is not supporting this router, but I have th...
Hi Experts,
Quick one..If a port on my switch is an access port and is connected to another access port, is it necessary to have the command "switchport nonegotiate" on the switch? I would ...
Is there any EIA/TIA standards on patch cable colors in the MDF/IDF?
Should all clients be a certain color? All WAP another? Uplinks another?
Anyone have a website with this? Can anyone...
Hello,
I manage a network of about 100 computers. It drives me insane when people don't leave their computers turned on and I have to walk halfway across the building to do any maintenance...
On my Dell D620 i have recently (after installing new windows xp) run into problems with wireless network card.
This network card fails just after few hours of usage, the drivers get unloa...
We have a single Cisco 851W router, it was working fine until we needed to make a change and discovered we no longer had the passwords for it -- so we attempted the password recover procedure ...
I just got Comcast Cable internet and want to share it around my house. I've been using Earthlink DSL and have a wireless network set up and ready to share, using the Netgear WGT624 Router. Wh...
