I went to the MySonicwall site but it only offers me "free" downloads, after signing in.
What does it take o get the latest firmware update for a TZ170?
Do I need to input it's serial number...
Our end goal is to have two wireless networks on the same access point using vlans. We need one for nursing staff which would be private and one for public internet. Our internet comes into ...
i was just handed a 2950 and told to upgrade its IOS to the latest image we have. The image is c2950-i6q4l2-mz.121-22.EA10a.bin. i followed this directions http://www.cisco.com/en/US/products/...
How can I find "open" IP addresses on our network? (I need to create an IP address for a printer)...
I just upgraded a FWSM from 3.2.5 to 4.0.4 and noticed before the upgrade the context license showed 20 before the upgrade but after upgrading to 4.0.4 it know shows 2. I followed the upgrade...
I'm having real trouble trying to forward ports over a GRE Tunnel, between Cisco 2811 and Cisco 1841 routers.
Topology is this -
Internet => Cisco 2811 => GRE Tunnel (over Internet) ...
A VPN client is having trouble establishing connection. He can ping the other end of the connection, but he does not get a login prompt when trying to VPN in. I have attached a log from the ...
Dear Friends:
I have 2 Linksys SRV2024 and i want to make Trunk with the port number 1.
- I put the port 1 (in both switches) in trunk mode
- I put the port 1 (in both switches) in th...
What is the problem with my Westell Modem and Linksys Wireless Router setup?
Folks, I have just installed a wireless system that of course, doesn't work. I have a Westell DSL modem (PPPOe) ...
Hi - I'm looking for the calculation to convert a Gigabit network speed to Megabytes (MB)/minute. Thanks.
-Chris
i have a 2960 switch, and i am trying to upgrade the image from c2960-lanbase-mz.122-35.SE5
to this c2960-lanbasek9-mz.122-25.SEE4.bin which i downloaded from Cisco's web site.
first i TFT...
I wanted to get a few opinions on the way our network is setup.
We have 2 locations in different states: Corp Office, Call Center
They are connected Via 3M (2 x T1) MPLS Circuit
The call ...
I have a linksys wireless 54g router and a belkin wireless 54g router. I need to extene the range of the wireless network. Is there a way to connect these two routers together to increase the ...
We have a Netscreen 5GT (ADSL) model.
We are trialling an Asterisk IP PBX and I was told to forward the ports UDP 5060-5061 and 10,000 to 20,000 to the PBX.
We have one static external I...
The zebra printer we have when you try to print a label, it will respond in a second, but all the labels are blank and it will keep feeding until you shut it off. I've checked settings on our ...
I just replaced an old linksys wrt54G router/wireless access point with a new ASA 5505 for a new client.
Everything is working fine except I am unable to get it to route to a remote subnet ...
I was wondering if there exists any small devices (preferably the size of a case holding a System-on-a-Chip, two RJ-45-contacts and a PSU/Battery) that do Layer2-Address Translation and VLAN-m...
I am looking for a way to turn on and/or resume from sleep my pc's. Wake on lan works fine on my local network but I need to be able to do it when I am away so I can remote into the machines....
Hello,
I have a TiVo, PS3, and Wii in the living room that all have wireless built in (with the exception of the TiVo that i added a wifi USB stick).
All the systems have issue with conn...
Guys,
i have just bought a new cisco 1800 series router,
conencted it up to my machine. but have forgotten how to log into it via command prompt,
i'm sure it was something like - con...
Is it possible to tell the cisco IOS to send a test message to the syslog server to check that messages are getting through ?
Hi Experts,
I am not an IT professional but I do know a little about the configuration of CISCO routers. I am using a CISCO 1841 to pass limited data between the two FE interfaces in a test...
I have a small business network (medical practice) with a Windows 2003 file server, Windows 2003 exchange server and just added a windows 2003 applicattion server. I want to replace my clients...
im using a usb huawei mobile broadband to connect to the internet. im having trouble connecting my webcam through yahoo messenger ver 8 on my network computers. . i got an error message "a net...
Does anybody know how to configure the Dell PowerConnect 3424 switch so that 3 ports, for example 15,16,17 could be members of 2 VLANS and PCs connect to those ports, DHCP clients or static IP...
