Problem: I cannot connect to my Cisco Aironet 1100 from my wired network.
I am trying to ping to my AP but can't connect to it. I've configured my 3750 port 2/0/14 to trunk but I?m not sure if I'm missing something on my AP. The port shows Up Up.
Network:
AP-1100
||
||
|| Trunking on port 2/0/14
||
Cisco 3750
I have VLAN 37 on my wired network and would like to extend it to my AP. My AP has vlan 37 configured and set vlan 1 as the native vlan.
Configs for AP:
dot11 ssid WLAN
vlan 37
authentication open eap eap_methods
authentication network-eap eap_methods
!
!
interface Dot11Radio0
no ip address
no ip route-cache
!
encryption vlan 37 mode wep mandatory
!
ssid WLAN
!
speed basic-1.0 basic-2.0 basic-5.5 6.0 9.0 basic-11.0 12.0 18.0 24.0 36.0 48.0
54.0
station-role root
!
interface Dot11Radio0.1
encapsulation dot1Q 1 native
no ip route-cache
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
bridge-group 1 spanning-disabled
!
interface Dot11Radio0.22
encapsulation dot1Q 22
no ip route-cache
bridge-group 22
bridge-group 22 subscriber-loop-control
bridge-group 22 block-unknown-source
no bridge-group 22 source-learning
no bridge-group 22 unicast-flooding
bridge-group 22 spanning-disabled
!
interface Dot11Radio0.35
encapsulation dot1Q 35
no ip route-cache
bridge-group 35
bridge-group 35 subscriber-loop-control
bridge-group 35 block-unknown-source
no bridge-group 35 source-learning
no bridge-group 35 unicast-flooding
bridge-group 35 spanning-disabled
!
interface Dot11Radio0.36
encapsulation dot1Q 36
no ip route-cache
bridge-group 36
bridge-group 36 subscriber-loop-control
bridge-group 36 block-unknown-source
no bridge-group 36 source-learning
no bridge-group 36 unicast-flooding
bridge-group 36 spanning-disabled
!
interface Dot11Radio0.37
encapsulation dot1Q 37
no ip route-cache
bridge-group 37
bridge-group 37 subscriber-loop-control
bridge-group 37 block-unknown-source
no bridge-group 37 source-learning
no bridge-group 37 unicast-flooding
bridge-group 37 spanning-disabled
!
interface FastEthernet0
no ip address
no ip route-cache
duplex auto
speed auto
!
interface FastEthernet0.1
encapsulation dot1Q 1 native
no ip route-cache
bridge-group 1
no bridge-group 1 source-learning
bridge-group 1 spanning-disabled
!
interface FastEthernet0.22
encapsulation dot1Q 22
no ip route-cache
bridge-group 22
no bridge-group 22 source-learning
bridge-group 22 spanning-disabled
!
interface FastEthernet0.35
encapsulation dot1Q 35
no ip route-cache
bridge-group 35
no bridge-group 35 source-learning
bridge-group 35 spanning-disabled
!
interface FastEthernet0.36
encapsulation dot1Q 36
no ip route-cache
bridge-group 36
no bridge-group 36 source-learning
bridge-group 36 spanning-disabled
!
interface FastEthernet0.37
encapsulation dot1Q 37
no ip route-cache
bridge-group 37
no bridge-group 37 source-learning
bridge-group 37 spanning-disabled
!
interface BVI1
ip address 172.31.37.3 255.255.255.0
no ip route-cache
!
ip default-gateway 172.31.37.1
ip http server
no ip http secure-server
ip http help-path
http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag ip radius source-interface BVI1
Config for Switch:
!
interface FastEthernet2/0/14
switchport trunk encapsulation dot1q
switchport trunk allowed vlan 1,22,31-37
switchport mode trunk
!
