I am not sure how much gain Antenna will I need for my WAP54G Access Point to extend it's coverage. Some seem to have Booster along with it.
I am looking at these 2:
http://downloads.links...
So I have setup a Cisco AP 1231G so it authenticates using WPA to a Windows dot1x server.
This works perfectly while the AP is plugged directly on the network.
What I would like to do now...
Hi,
I've moved to a new house - which is big and has thick walls.
My wifi access point doesn't have the range to fill the house - so I want to install more.
Ideally I would connect al...
On my cisco 841w I am offering 2 ssids. Vlan1 is my Open ssid and dhcp is terminated on the cisco device. Staff is Vlan10 and dhcp is offered from my internal network. I have all my SMC 255...
Were looking to allow a free WIFI connection, but we want to be able to limit the amount of bandwidth on the free end. So lets say Mgt+employes can get 60% of the bandwidth and users on the fr...
I have connected a LINKSYS wireless Access Point to a CISCO switch. I am able to view the Access Point when i perfom a search. When i enter key to this access point i receive message "Limited...
Hi all,
Need some advice on the easiest way to setup a forced splash or default webpage when people connect to a wireless (or wired) network (similar to what they do in hotels etc).
Idea...
For my Linksys Access Point WAP54G, can you recommend some good wireless adapter to go on the PCs that can connect wirelessly to the AP, from your experience.
I will also need one for a PC...
I am trying to provide coverage in a large parking lot with two access points that have external omni antennas on the roof of buildings at both ends. My goal is to have one SSID but my questio...
I have a building that I need to install 9 wireless APs into (3 / floor).
I have ordered 9 EnGenius ECB9500 long range Wireless N APs and 3 PoE injectors. I have never used PoE before and ...
