Advertisement

07.10.2008 at 12:31PM PDT, ID: 23555125
[x]
Attachment Details

Problems flashing LWAPP to IOS Autonomous mode Cisco Aironet 1131AG Access Point

Asked by cyclebrock in Wireless Network Access Points, Wireless Networking, Networking Hardware

Tags: Cisco, Aironet, 1131AG, Premature end of tar file ERROR: Image is not a valid IOS image archive.

I have read all of the posts regarding similar issues with upgrading from LWAPP to Autonomous Mode. Here is my case:

I have 2x Aironet 1131AG Wireless Access Points.

One is brand new and has the latest IOS version flashed to the device
The other was shipped to me from Hong Kong and was flashed with LWAPP

I have followed the steps located on the cisco website as per re-flashing the device using TFTP

Below is the output of the session & error codes.

The IOS tar file is the correct file as we used it to flash the identical AP previously.
My TFTP directory contents are as followed:

$ ls /tftpboot
-rwxrwxrwx 1 nobody root 5560320 2008-07-08 21:14 c1130-k9w7-tar.124-10b.JA.tar

md5checksum matches cisco's websiteStart Free Trial 
1:
2:
3:
4:
5:
6:
7:
8:
9:
10:
11:
12:
13:
14:
15:
16:
17:
18:
19:
20:
21:
22:
23:
24:
25:
26:
27:
28:
29:
30:
31:
32:
33:
34:
35:
36:
37:
38:
39:
40:
41:
42:
43:
44:
45:
46:
47:
48:
49:
50:
51:
52:
53:
54:
55:
56:
57:
58:
59:
60:
61:

Xmodem file system is available.
 
flashfs[0]: 3 files, 2 directories
 
flashfs[0]: 0 orphaned files, 0 orphaned directories
 
flashfs[0]: Total bytes: 15998976
 
flashfs[0]: Bytes used: 1870336
 
flashfs[0]: Bytes available: 14128640
 
flashfs[0]: flashfs fsck took 28 seconds.
 
Base ethernet MAC Address: 00:1a:a1:0e:1d:6e
 
Initializing ethernet port 0...
 
Reset ethernet port 0...
 
Reset done!
 
ethernet link up, 100 mbps, full-duplex
 
Ethernet port 0 initialized: link is up
 
button is pressed, wait for button to be released...
 
button pressed for 67 seconds
 
process_config_recovery: set IP address and config to default 10.0.0.1
 
process_config_recovery: image recovery
 
image_recovery: Download default IOS tar image tftp://255.255.255.255/c1130-k9w7
 
-tar.default
 
 
 
examining image...
 
extracting info (272 bytes)
 
Premature end of tar file
 
ERROR: Image is not a valid IOS image archive.Loading "flash:/c1130-rcvk9w8-mx/c
 
1130-rcvk9w8-mx"...#############################################################
 
################################################################################
 
############################
 
 
 
File "flash:/c1130-rcvk9w8-mx/c1130-rcvk9w8-mx" uncompressed and installed, entr
 
y point: 0x3000
 
executing...
[+][-]07.30.2008 at 04:03PM PDT, ID: 22125551

Experts Exchange has a courteous staff of administrators who help members get the most out of the website by means of administrative comments like this one.

Start your 7-day free trial to view this Administrative Comment or ask the Experts your question.

 
[+][-]08.02.2008 at 11:14AM PDT, ID: 22145177

Experts Exchange has a courteous staff of administrators who help members get the most out of the website by means of administrative comments like this one.

Start your 7-day free trial to view this Administrative Comment or ask the Experts your question.

 
[+][-]08.02.2008 at 11:34AM PDT, ID: 22145236

View this solution now by starting your 7-day free trial. Setting up your free trial is quick, easy, and secure. We will return you to this solution, unlocked, when you're done.

 

About this solution

Zones: Wireless Network Access Points, Wireless Networking, Networking Hardware
Tags: Cisco, Aironet, 1131AG, Premature end of tar file ERROR: Image is not a valid IOS image archive.
Sign Up Now!
Solution Provided By: cyclebrock
Participating Experts: 0
Solution Grade: A
 
 
 
Loading Advertisement...
20080716-EE-VQP-32 / EE_QW_2_20070628