I am trying to create a separate VLAN for public WIFI at our office. All I want the public WIFI to have access to is just the internet. I don't want them to be able to access anything else. I am using a Netgear GS748TS switch and Netgear FVS336G router and Netgear WG302v2 access point. I have 2 security profiles in my access point, 1 is for the private and one for public. My private one is using VLAN 1 and the public one is set to VLAN 2.
The part I get confused at is what to do about the tagged and untagged ports. I need the Access point to see the router on both VLANs. So I have 2 cables coming from the router to the switch. I have one that should be the VLAN 2 port and one that is VLAN 1. For some reason though when I do this, the router just starts sending traffic back and forth rapidly and it locks up until I disconnect one of the cables and restart it. What am I missing here?
Start Free Trial
