ITIExperts1
asked on
How to stop Konica Minolta Bizhub C284e driver switching from English to French on its own?
Setup this printer with the standard and the monochrome Drivers. On its own, it switches from English to French. I have tried to get a handle on what the users are doing when this happens but it varies too much to find a specific cause.
I have deleted and re-added the printer several times for several users. Made sure the printer itself is set to English. Created a shared printer on the main workstation (this is a Windows 7 'Workgroup'), created the printer using its' IP Address...
Sometimes after 7 print jobs, sometimes after 7 days, the Printer Preferences just change to French. This happens sporadically to some of the users but not all in the workgroup.
I have deleted and re-added the printer several times for several users. Made sure the printer itself is set to English. Created a shared printer on the main workstation (this is a Windows 7 'Workgroup'), created the printer using its' IP Address...
Sometimes after 7 print jobs, sometimes after 7 days, the Printer Preferences just change to French. This happens sporadically to some of the users but not all in the workgroup.
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
Yes, grade as you see fit...
I would wait a few days to make sure it is fixed since that has been what happened--ok then goes to French so wait a few days just in case
I've requested that this question be deleted for the following reason:
Not enough information to confirm an answer.
Not enough information to confirm an answer.
After questioner went to the website to get the latest drivers he said the issue is gone so that is most definitely a solution. https://www.experts-exchange.com/questions/28652145/How-to-stop-Konica-Minolta-Bizhub-C284e-driver-switching-from-English-to-French-on-its-own.html?anchorAnswerId=40714786#a40714786. In the very next comment he said using the PCL instead of the PS solved the problem https://www.experts-exchange.com/questions/28652145/How-to-stop-Konica-Minolta-Bizhub-C284e-driver-switching-from-English-to-French-on-its-own.html?anchorAnswerId=40717324#a40717324. Clearly my suggestion worked.
ASKER
Closing call.