I am trying to process documents in Adobe Capture 2.0 using an HP 6350 scanner. I am forced to use PrecisionScan Pro and its TWAIN driver because there is not an included ISIS driver in Captu...
I buy a 3300C scanjet scanner, and i dont look on the box when i buy it, so when i oppen the box, i get the surprise that the 2 cd are for windows only, ok, for program, but for the driver, i ...
Does the ScanJet 4100C have NT drivers? We upgraded a computer from W95 to NT and need the drivers for this scanner.
Are there any scanner drivers available for the scanjet plus that will work with windows95 or is this scanner basically obsolete?
How can I get the lamp light to go out when scanner is not in use. I have a 3200c Scan jet HP. They should have a switch for this. Thanks Entity
I want to clean the inside of the glass on my 6200C scanner, but can't figure out how to get inside. Any suggestions? Also, I've just been using a dry cleaning cloth (Kensington Lint-Free Surf...
I'm looking at the possibility of networking a Epson 4180 scanner. Is this possible ... or advisable or should I look at just buying a netorkable scanner. I have a low volume scanning needs.
...
I have a HP scanner which attached to my network. I want to be able to search for it in windows scanners and cameras wizard. When I install the drivers by going to 'Add an imaging device' th...
WHen scanning a picture or other things the scan is black in the
preview screen. What is wrong.
Does the 6300c support TWAIN. If so, does it have a twain driver?
I have a scanjet3300c scanner with a compaq presario 4540 computer. After installing the scanner it was working fine for a few days. Now when I go to scan or use the copy utility I get this ...
Why does my 6300 C produce a 4 inch wide yellow streak through all of my scanned images?
My scanner works fine scanning into my files and onto cds and disks but when I press the scann button, nothing.
My printer (DeskJet 882C) also works fine from all other software but when I ac...
I downloaded and installed the patch for the lamp, it does turn the lamp off once the computer is turned off. However, if the scanner is inactive for ten minutes, it doesn't turn the lamp off...
All of a sudden, when I try to use my scanner, I first get the HP box, then the following message, which means the stupid thing won't work:
HPPRSCLT caused an invalid page fault in
module H...
I had Win95, got new Win98. Scanjet 5100C will not install from the orig. CD, says it's only good for Win95. Downloaded upgrade (sj259en.exe). Tried to run it, got message "an error prevents s...
I have a Gateway GP7-450PC, an HPLaserjet5L printer and the scanjet3200C. I have installed the sj325mu, sj326en and sj327en patches. I still cannot get the PC to find the scanner. What do I...
My computer: home built AMD K2-6 450 Mhz, 128 MB ram, USB, multi-port parallel card + motherboard parallel port, QIC 80 tape drive on floppy controller, ISA sound card, ISA modem, AGP video.
...
I keep getting this message when I try to use by scanner: "Sorry cannot access your scanner, your scanner is currently being accessed by another application. Please wait for the other applic...
My scanjet 5p makes a loud grinding noise every time. The carrige tries to drive itself through the case. No image is produced. Has anyone else had this problem. Is there a way to reset or...
Does anyone know what kind of scsi connector is on the back of a scanjet 6300c? I am assuming it is a 50HD female connector, but I just wanted to make sure. I have an Adaptec 1505 SCSI card ...
My Scanjet 5100C is less than a year old an has been used moderately. When scanning a vertical 1 1/2 inch yellow band is super-imposed on the picture being scanned. What is the problem and mai...
Is there a device to enable me to scan negitives. I have heard you can but you need a light sorce behind the negitive.
I have the ScanJet 3300C.
TIA
Kolin
Whenever I scan in color, I get get a vertical yellow stripe down the left side of the page (does not happen in B&W). This happens whether I use Deskscan 2.9 or PrecisionScan 1.0 (I am using ...
My question is the same as Bach's
I had a perfectly good scanner functioning under win95 but as soon as I upgraded to win98 my scanjet plus no longer works
i know it's old, but heck, it's go...
