Hi everyone
I am having problems installing my Canon LIDE 20 USB scanner. The windows 98 SE computer I use is not recognizing it. The scanner is connected via a USB port. Under the Ports ta...
I have been using a Canoscan LiDE 40 scanner with my Windows machine for a few years with no problem. I downloaded the driver from Canon for Mac OS X recently and I'm now trying to get it to ...
network share is running on windows server 2008
we have an oce tds 700 scanner that is connected to our network. On the scanner there is a option to set up the scan-to-file. To configure the ...
I am running XP and using a Canon LiDE 35 (?) scanner. It has been working fine for some time. Now, when I try to start scanning using the "MS Office Document Scanning" button that is pinned t...
I've got the above scanner and I cannot get it to work. I have installed the correct drivers and am using Presto! Page Manager as the scanner application but when I try to scan a document is ...
I have an Epson Perfection 4490 flatbed scanner and a Xerox DocuMate 152 sheetfeed scanner attached to my Win XP Pro (fully updated) PC -- plenty of processor power and RAM. Since I got the Xe...
Hello,
We are starting to think about migrating to terminal services for our production department. My question is that they currently have a cheap networked hp all in one unit that they sc...
I have a Brother MFC-420cn connected to a Dell Optiplex GX50 running Windows 2000 SP4. All aspects of the MFC work fine except the scanner. The Brother diagnostic software shows the status a...
I got a Flatbed Canoscan FB 630U, and it's only connected through a USB cabel.
When I try to scan I get this error message :
"Error getting the Twain data source. Please check if it's conne...
Hi. I've got a Canon DR5020 SCSI scanner, which is attached to a workstation running Win XP Pro via an Adaptec 29320ALP SCSI card. The problem is the scanner is picked up by Windows, which the...
A client has an older Panasonic DP-2310 multifunction copier, which supports network scanning. I do not have the original software that came with the unit, and all I can find online is a prin...
Hello,
I have a scanjet 5590 by HP that gets a e23 on the display. When this happens it locks up and has to be unplugged to reset. It is now happening several times a day. I have not bee...
I'm trying get recommendations for a good double sided scanner with OCR software. Doesn't matter if the software would be seperate, just looking for ideas. Here is my scenario:
We take in...
As above guys, the setup from the web runs and then prompts you to attach the parralel and the USB
At this stage it finds new hardware but doesnt find the drivers, you point it to the dire...
My company has just purchased a Metrologic Eclipse USB Barcode Scanner model: MS5145.
We purchased this scanner with the intention of using it to scan the MAC Address barcodes off of POLYCO...
System:
Printer/Scanner is a Panasonic DP-C262. We had been using the scanner to send all scanned documents to a network share. Recently, we enabled the scan to email option. We are conn...
I just took the leap and upgraded to XP. Much to my dismay, the system now does not find the Astra 1220s.
I tried installing the newest Vistascan driver, recycling the power on the scanner, l...
Hi there,
I have a Scanjet 5550c which came with the HP Director software.
My problem is that if I use ANY other software to scan, I dont have a way to turn OFF the preview. The twain dr...
I have scanned from the the Brother scanner documents to a PDF file like passport/driver license and MS Word docs (3pages), and they resulted TOO LARGE.
I need these to be to under 100K an...
what's the difference between a parallel cable and a usb cable? If you have the software and a parallel cable can't you use them instead of the usb cable? this is for a digital camera.
I'm trying to install a PaperPort XP 200 USB scanner. The software installs successfully, and then prompts me to plug in the hardware. XP detects and correctly identifies the new hardware, b...
Does anyone have a safe tweak tool or reg hack to set the WIA defaults?
I have an old but reliable Canon DR-5020 scanner that I've recently moved to a new Vista workstation. And thus the problem begins.
Vista 32bit workstation on Dell Optiplex 755
Adaptec AHA...
I've recently reformatted/reinstalled my system with WinXP (which i was running previously) yet when reinstalling CanoCraft Drivers i'm unable to import or get the scanner to start scanning.
...
My onetouch visioneer 5800 scanner will not scan. Error keep popping up - unlock scanner - lock on the bottom of scanner. There is no lock on the bottom of the scanner.
