Link to home
Start Free TrialLog in
Avatar of DarylnCA
DarylnCA

asked on

Cisco 1760 Routers and Channelized T1 for output to network and digital equipment.

I guess I needed to clarify the question some...

I need to configure two Cisco 1760 Routers with WIC-1CSU-T1 cards channels 1 through 12 and 24 to be passed through from Router to Router across the T1. I am using the system to pass those channels to a digital phone system and the remaining bandwidth is passing Data between the locations LAN/WAN(I am a novice with Cisco but the Configuration Maker has been a help)
I called Cisco and am waiting a resolution... They get screwed up when I mention phones.
I can currently use the T1 without the Routers to pass the Phone signal from PBx to PBx no problem.

It appears there needs to be an additional WIC card on each router in order to pass the channels across that is being sent to the PBx.
ASKER CERTIFIED SOLUTION
Avatar of Les Moore
Les Moore
Flag of United States of America image

Link to home
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
Start Free Trial