acpress
asked on
web interface for the Cisco 2948 switch?
Is there a way to configure the cisco 2948 switch from a web based ultility? Thanks, Darryl
ASKER
That I did,, but when I go,to the device via port 80 I get this as a page..any clues?
-------------------------- ---------- ---------- ---------- ---------- ---------- ----
Help resources
CCO at www.cisco.com - Cisco Connection Online, including the Technical Assistance Center (TAC).
tac@cisco.com - e-mail the TAC.
1-800-553-2447 or +1-408-526-7209 - phone the TAC.
cs-html@cisco.com - e-mail the HTML interface development group.
--------------------------
Help resources
CCO at www.cisco.com - Cisco Connection Online, including the Technical Assistance Center (TAC).
tac@cisco.com - e-mail the TAC.
1-800-553-2447 or +1-408-526-7209 - phone the TAC.
cs-html@cisco.com - e-mail the HTML interface development group.
ASKER
It is not in production yet...
The switch may be missing the required html files in flash. If you type dir flash: you should see a html directory. Yours looks like there isn't one there, or files are missing.
ASKER
I type that in and get: "no such file". Where do I go from here?
Did you put the colon on the word flash?
dir flash:
dir flash:
ASKER
oops..this is what I get when I do it correctly:
CiscoGigFeatures> (enable) dir flash:
Open device flash failed (unknown device)
CiscoGigFeatures> (enable)
CiscoGigFeatures> (enable) dir flash:
Open device flash failed (unknown device)
CiscoGigFeatures> (enable)
Seeing your prompt, it looks like the switch is running Catalyst OS, not IOS.
Give me the output of "show version" "show module" and "show flash"
Give me the output of "show version" "show module" and "show flash"
Just for fun you can also try "dir"
ASKER
sho ver:
Copyright (c) 1995-2004 by Cisco Systems, Inc.
NMP S/W compiled on Mar 12 2004, 16:18:42
GSP S/W compiled on Mar 12 2004, 15:22:33
System Bootstrap Version: 6.1(6)
Hardware Version: 1.1 Model: WS-C2948G-GE-TX Serial #: JAE0931H7FT
Mod Port Model Serial # Versions
--- ---- ------------------ -------------------- -------------------------- -----
--
1 0 WS-X2948G-GE-TX JAE0931H7FT Hw : 1.1
Gsp: 8.3(2.0)
Nmp: 8.3(2)GLX
2 52 WS-C2948G-GE-TX JAE0931H7FT Hw : 1.1
DRAM FLASH NVRAM
Module Total Used Free Total Used Free Total Used Free
------ ------- ------- ------- ------- ------- ------- ----- ----- -----
1 65536K 36621K 28915K 16384K 5578K 10806K 480K 289K 191K
Uptime is 1 day, 16 hours, 55 minutes
sho mod
--- ---- ----- ------------------------- ------------------- --- --------
1 1 0 Switching Supervisor WS-X2948G-GE-TX no ok
2 1 52 10/100/1000 Ethernet WS-C2948G-GE-TX no ok
Mod Module-Name Serial-Num
--- -------------------- --------------------
1 JAE0931H7FT
2 JAE0931H7FT
Mod MAC-Address(es) Hw Fw Sw
--- -------------------------- ---------- -- ------ ---------- -----------------
1 00-14-a8-f6-2b-c0 to 00-14-a8-f6-2b-ff 1.1 6.1(6) 8.3(2)GLX
2 00-14-a8-f6-2b-9e to 00-14-a8-f6-2b-fd 1.1
sho flash
CiscoGigFeatures> (enable) sho flash
-#- ED --type-- --crc--- -seek-- nlen -length- -----date/time------ name
1 .. ffffffff 8319cd46 4b25c0 24 4662592 --- -- ---- --:--:-- cat4000-k8.8
-3-2-GLX.bin
11065920 bytes available (4662720 bytes used)
dir:
CiscoGigFeatures> (enable) dir
-#- -length- -----date/time------ name
1 4662592 --- -- ---- --:--:-- cat4000-k8.8-3-2-GLX.bin
11065920 bytes available (4662720 bytes used)
Copyright (c) 1995-2004 by Cisco Systems, Inc.
NMP S/W compiled on Mar 12 2004, 16:18:42
GSP S/W compiled on Mar 12 2004, 15:22:33
System Bootstrap Version: 6.1(6)
Hardware Version: 1.1 Model: WS-C2948G-GE-TX Serial #: JAE0931H7FT
Mod Port Model Serial # Versions
--- ---- ------------------ -------------------- --------------------------
--
1 0 WS-X2948G-GE-TX JAE0931H7FT Hw : 1.1
Gsp: 8.3(2.0)
Nmp: 8.3(2)GLX
2 52 WS-C2948G-GE-TX JAE0931H7FT Hw : 1.1
DRAM FLASH NVRAM
Module Total Used Free Total Used Free Total Used Free
------ ------- ------- ------- ------- ------- ------- ----- ----- -----
1 65536K 36621K 28915K 16384K 5578K 10806K 480K 289K 191K
Uptime is 1 day, 16 hours, 55 minutes
sho mod
--- ---- ----- ------------------------- ------------------- --- --------
1 1 0 Switching Supervisor WS-X2948G-GE-TX no ok
2 1 52 10/100/1000 Ethernet WS-C2948G-GE-TX no ok
Mod Module-Name Serial-Num
--- -------------------- --------------------
1 JAE0931H7FT
2 JAE0931H7FT
Mod MAC-Address(es) Hw Fw Sw
--- --------------------------
1 00-14-a8-f6-2b-c0 to 00-14-a8-f6-2b-ff 1.1 6.1(6) 8.3(2)GLX
2 00-14-a8-f6-2b-9e to 00-14-a8-f6-2b-fd 1.1
sho flash
CiscoGigFeatures> (enable) sho flash
-#- ED --type-- --crc--- -seek-- nlen -length- -----date/time------ name
1 .. ffffffff 8319cd46 4b25c0 24 4662592 --- -- ---- --:--:-- cat4000-k8.8
-3-2-GLX.bin
11065920 bytes available (4662720 bytes used)
dir:
CiscoGigFeatures> (enable) dir
-#- -length- -----date/time------ name
1 4662592 --- -- ---- --:--:-- cat4000-k8.8-3-2-GLX.bin
11065920 bytes available (4662720 bytes used)
OK, I finally have your answer. Check out
http://www.cisco.com/en/US/products/hw/switches/ps708/products_installation_and_configuration_guide09186a00801d3c57.html
You need a different CatOS image. you have cat4000-k8.8-3-2-GLX.bin, which supports ssh. You need cat4000-cv8.8-3-2-GLX.bin. Note the name change- the "k" is replaced with "cv"
http://www.cisco.com/en/US/products/hw/switches/ps708/products_installation_and_configuration_guide09186a00801d3c57.html
You need a different CatOS image. you have cat4000-k8.8-3-2-GLX.bin, which supports ssh. You need cat4000-cv8.8-3-2-GLX.bin.
ASKER
ok..I got that flash image and it works...thanks for your help...
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
config t
ip http server