my server Dell poweredge server 2003 with RAID 5, one hard disk blinks green and amber..
how to get rid of the amber? Is tha HDD bad? if yes how to remove..please give me step by step guid...
I have jsut purchased a bunch of Dell 2950's with on-board Broadcom NetExtreme II NICs and PCI Intel1000 NICs. I am used to the HP NIC teaming software, so when I attempted to bond the NICs w...
Hello,
I have installed the RaidMan-9.00.i386.rpm using the instructions here - http://ubuntuforums.org/showthread.php?t=597256
Basically what I have done is converted to .deb with alien...
We just purchased a new HP DL320 G5P. The server is running Server 2003 32-bit standard. We are using the on-board SATA RAID. We have 2 drives in a mirror. The mirror can be setup fine usi...
I have about 6 new Dell 2950s with the embedded Broadcom NetExtreme Gigabit NICs. I have them all teamed successfully, but regardless of the type of team, the link speed always shows 1Gbit ins...
We currently Have the following setup;
- a c7000 Blade, containing 5 ProLiant BL460c G1
- a 2012fc SAN
- 4/16 port HP Fibre Switch
- 16 port HP Passthru (already installed into the Blade)
...
I've ran into abit of problems regarding a Sun SPARC Enterprise M5000 server.
The server currently got no OS installed so the system cannot boot, and this is intentional.
However the system ...
Restarting the server we get below message
"Amount of available memory limited to 256 MB!
Strike the F1 key to continue, F2 to run the setup utility"
I have a recently purchased Fujitsu RX300 S4 server which has 6* SAS 73GB Hard Disks. I am looking to have this machine host around 5/6 virtual machines using ESX 3.5. I have a RAID 5/6 SAS ba...
I am getting a Stop Error when I try and login to a server. The error is:
0X0000008E (0XC0000005, 0X8092D47F, 0XB8ABB914, 0X00000000)
What should I be looking for as the problem?
I am trying to install Windows server 2003 on an hp Proliant Ml-370 G3 server. i get as far as the screen which says to setup windows now press enter to quit setup press f3 etc. When i press e...
Hello,
Can someone tell me how to access the bios settings on a hp proliant ml310 pentium 4? I tried esc, f10,f1, and f2 all I can ever get into are the raid settings. I do see on the boo...
I am having problems finding a NDIS2 driver for the Broadcom NetXtreme 57XX that works with my Ghost Boot Disk creator utility. There are several posts out there with people having similiar p...
After rebooting the server it has now gone into a continuous reboot. I am trying to get to the recovery console but cannot get the scsi drivers loaded have contacted dell but the link to the...
Hi Experts
I have been having this problem for about 2 weeks now since we upgraded the server.
The error log is as follows:
28/04/2008 23:00
-------------------------------
Date: 28/0...
I am migrating to a new server for a client, and the Netlogon folder will not copy over. The new server is a DELL Power Edge 2900 with a DELL Perc 6/i SCSI Disk. The old Server is a DELL Pow...
I am running Low disk space on C: under windows 2003 server Standard Edition. The total Size of the C drive assigned was 40 GB and it was running fine. But suddenly when I checked the space it...
We just bought this new server and installed Netware 6.5 sp7 just fine from the Netware install CD. We booted from it as normal and installed without problem. However, I want to start over a...
I have first generation HP BL 20p server blades running version 1.91 iLO firmware and the latest Java client. I want to rebuild the machines from scratch and since they don't have physical flo...
*max points - please help me
Hi all,
I have shipped a Poweredge 2850 from another location where it was owrking perfectly.
I connected KVM today to boot it up and the LCD looks ok - no fl...
Hello,
I just purchased this server off ebay and do not know much about the older Dell PowerEdge setups. It has a Dell PERC 3/Di which I assume is also an Adaptec AIC-7899?
How do I ente...
Hi All,
I had previously requested for a solution as I was running low on disk space on system drive(C) on windows 2003 server standard edition, I have tried all the solutions which were sen...
I recieved a call this morning informing me that our DC down in ST Croix (which is only 3 month old) is down and will not boot. The person who called me informed me the internal health led on ...
Server OS: SBS 2003, fully patched.
RAID hardware: ICH8R/ICH9R SATA RAID Controller
Issue:
We have recently install a Ez-Swap2 removable SATA drive/caddy system. Since then our server ha...
I am working on a Dell PowerEdge 2500 Server that is about 7 years old. It has mirrored hot-swappable 36 gig Seagate ST336605LC SCSI Drives. One drive has failed completely and I need to rep...
