I am running out of space on my old dell server. I got a new server and installed Windows Server 2003--dcpromoed-dns- and a few other things including copying the documents and settings files...
Wondering if anyone has a recommendation for USB 2.0 card brand to use in my HP ML370 G3 tower server. I have some generic one that causes a blue screen when i plug in my flash drive.
The network I'm working on is shared by two companies. One is on SBS 2003 with a domain. The other company is in a workgroup. All have the same ip scheme (192.1.1.x). We also have a VPN device...
How do I tell what the RAID configuration is on a server ?
Hi All,
The server is in a remote location and has x2 73GB SCSI disks mirrored,
We are running out of drive space and would like to add 2 more disks and also configure them remotely but...
I have an HP Storage Server, which is an HP Proliant DL380 G5 with 3 GB Memory and dual 2.66 GHZ Xeon Processors.
An HP Storage Works MSA20 is connected to it and contains Six 500 GB Drives....
I have a Hp Proliant ML330 running Server 3003
ATA 80GB disk0 O.S.
ATA 80GB disk1 application
I installed a controller card Adaptec ATA RAID 1210A
My system will not boot from disk0 anym...
Am using HP Smartstart version 7.9. Win2k server is currently installed and wish to upgrade to Win2003.
On choosing the Deploy server option, I get a list of supported operating systems fo...
Need to get a significant about of equipment to various locations for installation in colocation facilities over a period of time. About 16+ servers in each shipment. What's the best way to ge...
We currently have a HP ML110 G3 Server that has a RAID 1 setup with 2 SATA 80GB drives. We are running out of space and are looking for options to increase it.
Ideally we would like to cha...
I have a PC in a department that is running very slow. I'd like defrag as that has fixed some of the problems I have had here, but it has taken up to 4 hours to do. This department cannot go...
Hey all i have a ds4300 connected to an IBM SAN16b-2 switch.. i have two hosts currenly connected and working.. When i try automatic discovery it finds no new hosts.. i know i am missing some...
Do I need to have a installed key & RAID Controller Memory Module to enable the RAID mode on a 2650? I have a 775n that has this and I am able to create a container. I don't want to have to pu...
Hi Guys,
I have an HP Proliant ML 270 Server. It already has 3 SCSI 36GB harddisks in Raid 5.
I want to add two more 36GB scsi harddisks and then i want to expand my D partition (i have ...
