Good day, I am looking for Visio Stencils for EMC CX4 storage range and Dell PowerVault TL4000. I did have look at Visio Cafe, but they only have CX3 and no TL. Does anyone know where else i c...
Hi
Please let me know Dell Power Edge 2600 will support Windows 2003 64 Bit Operating Systems?
Thanks for your input
Hi,
I recently received my DL140 G3 Server and the issue I am having at the moment is getting my 2 (two) Seagate Barracuda 160GB hard drives detected during Server 2003 installation. I'm 10...
Hi everybody, new member, first post! I've been browsing trying to find a solution to my problem, but so far no luck so i thought i'd ask. This seems overly simple yet is evading me.
We b...
I am about to buy a Dell PE 2950 III server but would like to clarify on hard drive specs.
What would be the difference in performance between these 2 types of hard drives:-
(1) 3.5" SAS 1...
Hi all
I need some help urgently, our senior engineer is unavailable and I we are receiving delivery of a new Blade server environment which I need to install. I have read up on Blade serve...
We have an older HP proliant server that we currently use as our intranet and symantec server. It has Windows Sever 2000 with SP4 and all current updates. We started with 2x 9.1GB drives in 1+...
I have a two Dell 2650 Power Edge servers with bad CD/ROM drives so I plugged in two external USB CD ROM drives in and still no go. I have the lates BIOS updates and ESM updates.
In the BI...
Hi can anyone explain the difference between ultra 3 and ultra 320? i've a raid 5 running ultra 3 15k hdd but one of the hdd is dead; can i used a ultra320 10k hdd of the same capacity to repl...
Hello Expert,
I have a DELL PowerEdge 2800 that is in need of a BIOS upgrade. Unfortunately it does not have a floppy drive. Does anybody have a method as to how to upgrade the BIOS witho...
I have an Intel Server s5000VSA with lates firmware and bios, running SBS200 + Trend Worry Free 5.
This is a custom system with 2 x Xeon 2.33Quad Active CPU's 4GB of ECC FB memory and 2 x 250...
I want to learn Vmware and I want to build a system to do so... This is the mb i looking at to build my server (ASUS P5BV-E/SAS LGA 775 Intel 3200 ATX Server Motherboard) http://www.newegg.co...
I have a proliant DL380 (g4 I believe). This unit has been a rockstar so far, but I went to move it today and boot the unit back up. It ran for about 10 Minutes and then restarted, and will ...
I am IT administrator of a new site. A Dell Power Edge 2450 needs internal H/W replacement, but I don't have key that came with server so I can't open the case.
How do I get in the case? t...
I purchased a user PE1950 server. When I powered it on I noticed it has a custom bios installed. It is from a company called LNXI. I looked them up on the web and they are no longer in busi...
Hello mates,
I am about to buy a new server for my company. But the point is that I am little confused and not much clear of what would be the best choice.
I have to decide between Dell P...
Hello,
we have a full c7000 HP Enclosure.
I saw that Management Processor Error on three servers:
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&objectID=c011...
How do i setup RAID 5 via the BIOS, since i do not have the DEll Open Manager Server Assistant CD
A Dell Poweredge 2950 that I am about to setup as a new Exchange 2003 Server Standard. I have 6 HD's at 80g each I would like to know the best partition for the OS and the second partition to ...
When I go into SYSTEM INFORMATION, I see 4 entries that say PROCESSOR. Does this mean I have 4 processor's in server?
how do i change the default location of documents and settings to the "D" drive instead of "C"?
A Client of mine has a HP Proliant ML110 G3 server running SBS 2003
and this week it has developed an annoying internal constant beep....
beep beep beep beep non stop. its driving people cr...
With HP's new BL460c's (new to me anyway) , their is a small chance when they reboot that they will get stuck at a grey screen preboot mode that is not recoverable from ILO power management op...
earlier today one of my drives went offline for some reason. After i rebooted and CONTORL+M it seemed to find the drive and rebuild it. When i left the office 1-2hours later it was 16% done re...
We have an HP c7000 Blade enclosure with only 3 half-height blades in it currently. Our sales guy also shipped us 2 HP 30-Amp PDU's (power strips) for power... however we only have 20-Amp out...
