The HP Storage Manager shows a degraded state on my RAID array (RAID1) and only one drive shows up so I assume the second drive has failed. I will power the system down and swap the drive for ...
Hi can anyone explain the difference between ultra 3 and ultra 320? i've a raid 5 running ultra 3 15k hdd but one of the hdd is dead; can i used a ultra320 10k hdd of the same capacity to repl...
Hi,
When arcconf is run, it is creating a file UcliEvt.log and each time arcconf is run after that, it logs the command details into this file.
Is there any option to prevent arcconf from...
Anyone know the default password for System Management Homepage in Linux? or even how to reset it in Red Hat 5 Enterprise
I am IT administrator of a new site. A Dell Power Edge 2450 needs internal H/W replacement, but I don't have key that came with server so I can't open the case.
How do I get in the case? t...
I have SBS server managing the network, also running exchange from it. I use a 6MB/DSL service which is great for surfing but awfull for the upload, for example when I send blast emails, or h...
I recently installed windows 2000 server on my Dell Dimension E510. It came with windows XP but I wanted to use it as a server so i put Win2k Server. It installed everything correctly but I ...
Hi,
I am very new to Dell server hardware configuration (HP servers are much more intuitive). I would like to know how to team NICs on a Dell PE2950. I have 2 onboard NIC ports and one PCI NI...
Running WIndows server 2003 std. I have two arrays: one for the OS (raid-1), and one for our data (raid-5). One of the Raid-5 drives failed in the data arry. Replaced the drive and rebooted ...
Hi All,
I Previously had a Raid 5 Array with 3 - 1TB drives, we recently expanded this Array to include a 4th 1TB drive, and reconfigured it via the Dell OMSA. It reconfigured successfully...
Greetings!
I have researched the heck out of this and have many more questions then answers so I thought I would go ahead and ask the experts.
First, our current server room is setup wro...
earlier today one of my drives went offline for some reason. After i rebooted and CONTORL+M it seemed to find the drive and rebuild it. When i left the office 1-2hours later it was 16% done re...
I have a Poweredge 2650 rack mount, service tag 28nnd21, with a RAID 5 with 3x36GB drives. The RAID was configured with Open Manage software. I'd like to add two more identical drives to inc...
Hi,
i am loking to buy a new database server and was wondering what is the best way to set it up? Should I have a raid 1 config for the OS and a raid 10 for data and logs or just lump the ...
Hello experts,
i have a new server room and i need to buy a split for this room but i don;t know how much BTU.
i have to tell the company how much heat would the servers provide and that is ...
One of the Ultra 3 SCSI drives in a ProLiant ML350 is blinking a repeating pattern.
The light that's blinking is the "arrow" ilght. the other two, the hard drive & fault lights do not come on...
When a usb drive is connected to the HP Proliant ML370 G3, the server will not boot from the c:\.
I also receive the message on boot "SCSI BIOS NOT INSTALLED".
I have had a look in the bios ...
I have a castelle faxpress 5000 and unable to login to the application as it was loaded by someone here prior to me starting. Is there anyway to get the password from a file or is there a def...
I'm not 100% certain I've posted this in the correct location, but here goes...
We implemented a BES server approximately 4 weeks ago, and everything has been fine up until this past Monday...
Hi guys,
Our SQL server keeps crashing. It is not a complete crash as I can still ping it, but SQL stops functioning, RDP does not work, and we can't even do a local log on. The lights on t...
I have a ML530 server that we are experiencing intermittent performance issues with. According to the HP insight manager the server is healthy, however it can take up to 1-2 minutes at times t...
Hi all
I need some help urgently, our senior engineer is unavailable and I we are receiving delivery of a new Blade server environment which I need to install. I have read up on Blade serve...
Hello there,
I have a mission critical HP DL380 with 3 x 36.4 gig hotswop drives in a RAID 5 array. This server runs Exchange 2003.
The drive is then divided up into a
C:\ Programs e...
I'm setting up/fixing a network that includes DNS and domain controllers, AD, SQL Server database servers, STMP, and IIS services. My understanding is that one right way to do this is to put t...
Hi
I am planning to Purchase my first test dell server (PowerEdge 840) but without monitor :( to save the money because my budget is very low
I already have a Dell Latitude D630 laptop
...
