Java 1.4.2 installation on Centos 5
Can someone guide me step by step (with current exacting urls etc) on how to remove/update java version 1.4.2 to 1.5 on a Centos 5server.
The drive that this file or folder is stored on does not allow long file names, or names containing blanks or any of the following characters: \ / : , ; * ? < > |
-
- Getting the above erro...
Is there any issue with racking a HP server in a DELL(Branded) rack? Are there any racking issues and do HP rails function properly in this setup?
What are the limitations in moving a remote exchange server license from one server to another? What if the old server explodes... then do I have to call Symantec to "get back" the license to ...
Hi There,
I'm planing to buy a new server to do the transition from exchange 2000 to exchange 2007 server.
I would like some feed back on HP proliant 370 g5 VS Dell power edge 2900 111.
In ...
Hi,
this is a continious question of this : http://www.experts-exchange.com/Hardware/Servers/Q_23836198.html?cid=239#a22775189
I have an old compaq ML 530 server with 3 Scsi hardrive inst...
RAID Guru's!
I have an issue with my HP NAS HP ProLiant DL100. There has been a dead drive in the server for a few weeks now, and I finally got the replacement drive in today, and I called...
Will an AS/400 run SQL Server 2008 32 bit Standard Edition?
This machine has a single 866MHz processor , I acquired two new 1GHz processors but they won't fit in the slots. Both the old and the new ones are slot 2 Intel Xeon I looked on the Intel site ...
I am trying to calculate how long the rebulid time will be on my clusters array.
I am expanding the array by upgrading the disks from 176 gb to 300gb drives
the drives are 10k rpm with 64 k...
I have to consider moving some rack mouunted server to a basement which is a bit dusty and has no aircon - any advice - apart from don't do it..
Hi All,
I need to rebuild a Dell PowerEdge 2850, but dont have the network drivers.
Does anyone know where i can download them.
The drivers or the whole installation CD would do.
I am migrating to a new Windows 2003 file server. Due to many in house programs being hard coded that currently point to my old server name, I am eventually going to give my new server the ori...
Hi Guys
Got a complicated one here so please bare with me. I have a complete Dell hardware house, switches servers and workstaions, 6 Servers (2 DC's) and about 40 workstations (ALL XP SP3).
...
I have an intel based server that comprises an SE7520BD2 SCSI motherboard with dual Xeon 2.8GHz CPUs & 2Gb ECC Buffered RAM.
It has 2 SATA HDDs in RAID 1.
Every day or two the server spo...
I am the new IT Manager here at my company. My predicessor did nothing. I have a NAS with about 10 million files on it. Some that have not been accessed since 95. The backups run forever. T...
I am going to start playing with ESXi for the first time and have a spare DL320 G5 I plan to use to for starters. Since I don't want to jump through hoops to get ESXi running on the onboard RA...
Have an IP address on a network that is pingable but I do not know what the device is. I cannot connect to the device via HTTP etc although to know what it is. Any other method I have tried re...
Does any one have the following (or a similar) setup:-
A series of IBM xSeries servers running Windows Server 2003 connected to an IBM iSeries using iSCSI HPA for it's RAID, Tape devices et...
Running windows 2000 advance server. Please direct me and explains the steps to change the ip address's on public NIC adapt of 2 node cluster without problem
could some one adise me on a good smpt log reader helps to present SMTP Log to an non technical user?
I am looking for sender, repcient, time stamp, subject ..
I have a HP ML310 G3 with the internal RAID 0,1 controller. In this momet we have one 80 gb SATA disk and one 250 gb SATA disk in raid 0. My question is. can i out another 80 gb disk and 250 ...
We have a Dell Poweredge 2950 and realized that we underestimated our storage needs. It currently have 2 x 250GB SATAu 7.5K drives. The hard drives are Raid1 whit 3 partitions (c:,d:,f:), I ...
Please help me to get an application software in RHEL which will basically be used to perform burning test (please do not mistake this with "CD/DVD Burning application") for a 1U server hardwa...
I have installed a USB 2.0 PCI card and connected a freecom USB 2.0 external HDD to a Windows 2000 server SP4. The devices are listed in the device manager but do not show in 'My computer' or...
