Hello,
i wanted to update the firmware of the iLo2 from one of our BL460 G1 Blades.
But the password from the iLo2 has changed an nobody knows it.
So i want to reset the password through...
We are currently looking into purchasing a complete solution for our company from one of three vendors - HP, Dell and IBM. We are looking at purchasing a Blade solution and a Fibre Channel SAN...
Dell Remote Access Card
My DRAC5 card will not connect to the 'Console Redirection' (where you control your desktop remotely). I am getting the following error when attempting to connect:
...
Hi,
I am looking for any information, on how to configure an IBM Blade to boot from SAN.
I have about 6 new Dell 2950s with the embedded Broadcom NetExtreme Gigabit NICs. I have them all teamed successfully, but regardless of the type of team, the link speed always shows 1Gbit ins...
Hello,
Can someone tell me how to access the bios settings on a hp proliant ml310 pentium 4? I tried esc, f10,f1, and f2 all I can ever get into are the raid settings. I do see on the boo...
I have a Dell Poweredge R200 with Windows Server 2003 32bit on it. I'm attempting to format the server and install Windows Server 2003 64bit in its place. However the server has a RAID array a...
After rebooting the server it has now gone into a continuous reboot. I am trying to get to the recovery console but cannot get the scsi drivers loaded have contacted dell but the link to the...
I attempted to migrate our blackberry server to new hardware, and performed the steps outlined in RIM's cut over. (turn off serrvices, install on new system, bring it online, etc).
Now whe...
I have a Dell PowerEdge 2900 server. It was running Windows SBS 2003. When I tried booting the server this afternoon I received the following message:
NTDETECT failed
From my brief sea...
Hi,
Hope you can help as this problem has been ongoing now for a number of months, I have joined this site specifically to fix this problem. As it is slowly driving me insane !
I have a ...
Hello,
I'm having to make a report to a "cost cutting committee" on why I have all my servers being changed out in years 3 & 4. They believe all servers should be replaced during the 5th yea...
Hi,
We have a powervault 745N system and recently it was restarted which resulted in a
Windows NT could not start because the following file is missing or corrupt:
Winnt_root\System32\Nto...
Our Dell Poweredge 830 server, (2 gig ram, Sata Raid) has been running Centos Linux (3 & 4) for about 18 months now, no problem.
===>Problem: Instead of the steady blue led on the front pa...
Hi,
I have a server with this error logged in the event log:
Event Type: Error
Event Source: Srv
Event Category: None
Event ID: 2019
Date: 21/01/2008
Time: 08:40:17
User: N/A
C...
We have a Dell 2650 server that was working fine till about a week ago. We turned the server off to move it to a different rack cabinet and now at boot up we get the error Embedded Sever Manag...
This all started a couple days ago when trying to install new servers to replace ESX boxes destroyed in indoor rain (note to others, do not adopt ceiling mounted ACs over your production rack)...
We recently inherited an Avocent DSR2161 IPKVM. We do not know the password for console access. We're also unable to get it on the network since we don't know what LAN subnet it was previously...
Hi all,
Does anyone know where I can find a place to download DELL openmanage? I cant seem to find it on the dell website.
Thanks.
i have a Dell poweredge 2500, and i have a RAID 5 container (3 SCSI drives). I want to expand the container, and purchased 3 additional drives. All the drives are Quantum Altlas 10K III SCSI...
How do I find a domain controller in a domain I know nothing about?
Adabtec 2100S Raid card
One of our hard drives went down which brought our raid down to degraded status. We ordered a replacement hd of the exact same model. Well the hard drive is a diff...
Hello,
We have a Dell PowerEdge 2850 with a PERC 4e/DC configured as a RAID 5. This afternoon an alarm went off and one of our drives is now blinking amber.
Is it possible to try and re...
Dell Poweredge 2450
I have just got a Dell poweredge 2450 server with two SCSI drives featuring a RAID PERC 3/Si Controller. I have received no drivers with the server.
I am trying to load ...
Hi
I have a domain that is controlled by SBS2003. I would like to use another machine running Server2003 standard edition as a Child DC for Active Directory Replication & a backup DNS Server....
