My network contains three Dell PowerEdge servers--one 4600 and two 2600s. None of the servers have the ability to read a DVD. I purchased an external DVD drive with a USB 2.0 connection. I ...
My Raid 5 is (was) composed of 3 disks. One disk failed and one of my coleage tried to replace with a new one (hot swap). After that the server gave a blue screen when restarted. Below are the...
Having problems with installing an LP10000DC-E HBA onto an HP DL560 G2 server.
Have installed the emulex bios onto the card and he fibre cables are in.
The card is visible on the fibre swi...
Hey all! Ok so here goes: I have a Blade Center H with 2 x HS21 blades, 2 x Cisco Ethernet Switch Modules. I have configured both modules with static IP's and working on Blade 1 I configure...
I have an ASUS Rack Server with no operating system.
I need to add 3rd party RAID drivers during a Server 2003 installation.
This server has no floppy drive, nor can it support adding a fl...
We're in the process of purchasing 5 PE 2650s to learn and do some minimal hosting on in our small computer service office.
Problem is that this is a small office size wise (1000sq ft) an...
Hi there,
I have an HP ML150 Proliant server running Windows 2003 SBS. This is my disaster recovery server and is only turned on if needed or for testing. I am attempting to restore data to...
Hi Guys,
I have the following issue when trying to use HP Data Protector to run a full backup of a windows server running in an ESX 3.0.2 Cluster.
Background info:
2 HP Proliant ...
Hi,
We have a powervault 745N system and recently it was restarted which resulted in a
Windows NT could not start because the following file is missing or corrupt:
Winnt_root\System32\Nto...
Hi,
Has anyone come across this error for Castelle Faxmain 8.0. "Faxmain Error Unable to send fax: Transmit attachment file error." I get this message when I select the send fax button aft...
I am experiencing performance issues on our network. This problem is either related to something in our network topology, network configuration, or a specific server. I need some assistance de...
Building a new server room.
1. 6' X 8' Room, No Raised Floor System
2. 3 - HP Servers
3. 3 - 24 Port Switches
4. 2 - Firewall/Router
5. 1 - Backup UPS
6. No backup generator required
...
www.crucial.com says my Dell Poweredge SC1600 can handle up to 4gig RAM
the server is running windows server 2000
will that OS be able to use 4gig RAM? if not, what is the max it will b...
I need to rebuild an H DL360R G2 and I have several versions of smart start. Which ones will work. I know that all versions aren't compatible with all servers.
Thanks,
J.R.
I have been handed a second hand proliant dl360 server with a linux distro loaded on it. When I boot the server is says (not exact words):
This server was designed for a different operatin...
I have a HP DL380 G2 Server with one CPU. Can I add a 2nd CPU when Windows 2003 Server OS is already installed. With out having to install HAL drivers go into BIOS ad make modifications ? Jus...
We have used windows 2000 server on HP ML350. Now we are trying ro reinstall windows 2003 server on this machine totally from scratch. At the moment, this server was configured Raid 5. From HP...
Windows 2003 Server:
Teachers want to view video's in:
http://www.ria.it windows media player
http://www.nasa.gov. quicktime
Opened up Secure School (firew...
Hi,
I am partitioning a 1U Server with Hardware RAID1 SATA that will have Windows Server 2003 - Standard Edition. I will be partitioning the OS = 30GB and the data storage = 270GB.
My que...
We have 12 servers with iLo cards and a rack mounted UPS. I was told that it's possible to telnet to the iLo card are do a hard boo on a server that is seriously hung. We also hae a 1X1x19 KV...
I need to upgrade all the firmware and drivers on our Dell PowerEdge 2600 and would like some advise on best practice in particular relating to the order the following should be installed in:
...
I have 3 windows2k3 virtual machines (created in Red hat enterprise virtualization) that i am creating in a cluster. I want to know if for testing purposes if i would be able to you a shared ...
I have 5 systemx servers I just installed the Remote Supervisor Adapter II in, and I'm having a problem getting the "Login Permission Attribute" to work. Here is my configuration:
Use Pre-C...
Hi there,
Bit of an open question, but I'm just looking for some pointers please. I have been asked to look into the possibility of switching some of users over to a thin client/server setu...
I am getting file in use error whenever I try to delete, rename or move some files on a network drive. (and No, the file is not open) I can still open, edit and save them without any problem.
...
