Server OS: SBS 2003, fully patched.
RAID hardware: ICH8R/ICH9R SATA RAID Controller
Issue:
We have recently install a Ez-Swap2 removable SATA drive/caddy system. Since then our server ha...
I am used to HP servers but we have recently gotten a couple PE 2950's in. These servers have LCD readouts on the front that appear to be scrolling the Server Name. I had to change the server ...
I have 5 systemx servers I just installed the Remote Supervisor Adapter II in, and I'm having a problem getting the "Login Permission Attribute" to work. Here is my configuration:
Use Pre-C...
I am sure this is a simple fix, but we have a CIM server with a MS SQL back end. This is all running on a Windows 2003 Server with SP1 and CIM 5.0
Yesterday we had someone do some required...
Hi All,
I just been given new server for free, I would like to convert the server into a my ultimate gaming PC but I am having a bit of problem finding graphics card to fit the server,
The...
www.crucial.com says my Dell Poweredge SC1600 can handle up to 4gig RAM
the server is running windows server 2000
will that OS be able to use 4gig RAM? if not, what is the max it will b...
What I am looking for is some tips on making a server maintenance check list. Basically I am making a recurring schedule to check our servers for any problems on a monthly basis.
Here are so...
I am running OCS in our DMZ - I have an Exchange 2007 environment, and ISA 2006 also. The error i am getting is as follows:
Cannot synchronize with the corporate address list
This started ...
I cannot ping my server form any workstation. Error Code 1231. Everything was fine before. I did make a GP change to my logon script, but I don't think that would keep my from pinging. If ...
Hi,
Have been getting number of error messages for the past few days on one of our multi-home IBM X Series 225 server with Raid 5 having 3 disk.
Following are the list of error messages:-
-...
Hey all! Ok so here goes: I have a Blade Center H with 2 x HS21 blades, 2 x Cisco Ethernet Switch Modules. I have configured both modules with static IP's and working on Blade 1 I configure...
Hi there,
I have an HP ML150 Proliant server running Windows 2003 SBS. This is my disaster recovery server and is only turned on if needed or for testing. I am attempting to restore data to...
I picked up an Adaptec 2610SA RAID Controller off of ebay. I also purchased two 200GB drives to plug into this controller. I went it the RAID setup and set up a RAID 1 configuration to mirro...
I have a Dell Poweredge 2800 server, and I am trying to install windows XP. I need XP for some software, and I can't work linux well. My server has a SCSI Hard drive from dell (standard drive)...
CISCO ACS 4.1
OS: Windows 2003 SP1 Member Server
I have installed ACS but TACACS+ and RAdius services won't start. I cannot access the web interface either at 127.0.0.1:2002 and CSAdmin se...
I am getting file in use error whenever I try to delete, rename or move some files on a network drive. (and No, the file is not open) I can still open, edit and save them without any problem.
...
How can you move a user profile from one domain to a diffrent domain?
The old server win 2000 exchange 2000 AD is down crash
. Is there a way to move that profile from the xp to the new d...
Hi,
Has anyone come across this error for Castelle Faxmain 8.0. "Faxmain Error Unable to send fax: Transmit attachment file error." I get this message when I select the send fax button aft...
Hi Experts,
How can I calculate the maximum room temperature threshold for a 10' X 16' server room with 15 servers in it? If the HVAC system were to fail, at approximately what temperat...
When Creating an Image, the clients connect and reboot back into Windows. The task will fail, the message at the console is Failed to Virtual Partition
I got a used dell 6600 poweredge, and it ran fine but had a ecc 1 bit error on riser a, memory a according to diagnostics, i swapped the chips and the error stayed in the same chip, according ...
I am experiencing performance issues on our network. This problem is either related to something in our network topology, network configuration, or a specific server. I need some assistance de...
Hi there,
Bit of an open question, but I'm just looking for some pointers please. I have been asked to look into the possibility of switching some of users over to a thin client/server setu...
Good day, I am looking for Visio Stencils for EMC CX4 storage range and Dell PowerVault TL4000. I did have look at Visio Cafe, but they only have CX3 and no TL. Does anyone know where else i c...
Hello Experts,
I need to migrate my Windows 2003 SBS to a RAID solution. Current Hardware:
Dell Poweredge 440SC No Raid, Single SATA drive.
I would like to move the Booting HDD with OS ...
