We have an office in the UK with a Watchguard Firebox X1000 connected to two other UK offices with Firebox X700 and an office in the Isle of Man with a Firebox II. All of these offices are co...
I have a vendor requesting to form a VPN where all traffic from me over the VPN NATs to a single private address. How do I have a NAT statement to map all inside addresses to a single private...
Hello Experts -
I have an urgent question. I need to connect to a Cisco PIX 501 with SonicWALL's Global VPN Client. Is it possible? It's prompts me for the pre-shared key and I enter it;...
These clients do not work when loaded on the same workstation. Is there a generic version that works with multiple vendors?
I have a cisco 1811 Dual WAN router.
It is currently configured with 2 WAN interfaces -
FE0 - For general internet use
FE1 - With static routes so only certain types of traffic can use...
Dear all,
I want to set up a VPN between my Macbook Pro and my Draytek Router, I have currently set up PPTP with just username and password. but willing to use IPsec or LT2P or any other c...
ASDM v6.1(1) has a section that shows Log in time and Duration of VPN sessions (Monitoring > VPN > VPN Statistics > Sessions)
I need to log those sessions to a file somewhere. Can it be don...
I have been using the PIX 525 for a number of years as a simple firewall, filtering inbound and outbound traffic and it does a great job. Recently Ive been looking into offering people VPN se...
I have a client that has this setup
site A asa5505
site b pix 501
I need to be able to have the cisco vpn client connect to site a and then be able to see and interact with servers on...
I have a PPTP VPN connection set up on my server right now that many clients are using and it works great. I am trying to connect a VPN router to it now and I must use an IPSec connection. ...
I have 3 sites connected each one to another via site-to-site VPNs.
The VPNs seem to be running just fine.
I'm using 3 XP Pro machines - one at each site- for testing that all have Trend...
I have WIndows SBS loaded with exchange and everything semms to be working correctly, however I can not VPN into the server using my laptop or home desktop running Windows XP service Pack 2. H...
I have RRAS setup on windows 2008 servers in the following way
ServerA
- In LocationA
- LAN NIC: 192.168.0.210
- WAN NIC: public IP 1 (static)
- Domain Controller with RRAS set as...
Hello,
we have 2 offices running on the same network and we want to utilize some of the existing hardware for both office. I have couple of questions
1.So i would need a separate server to...
I have setup a dedicated server at a datacenter which host files and requires some type of access to those files from multiple sites.
My simple solution was to allow VPN connections to the ...
Folks,
I have been struggling for a couple of days now trying to setup a site-to-site tunnel using 2 Cisco ASA 5510s. I can ping the outside interfaces from either location but I cannot acce...
Hi experts
We have laptop which will be used from home of some users.
For that I have created a VPN-Connection with RAS and windows xp built in client.
Now it would be really nice if co...
I think I have gone through every screen on the sonic wall but I can't find the pre-shared key so I can connect with a VPN client.. I guess I may have missed it or I don't know?
I took over...
Hi
I have a user who connects to a small business server via vpn. About once every couple of months, she recieves an error message saying "computer is not accessible. You might not have permi...
I have scanned many posts but don't seem to see the answer.
I am using Check Point FW and VPN client and want a Vendor to access our network but they are on teh same subnet as us (192.168.1.0...
Our office has three locations connected by a VPN set up with Juniper Netscreen 5GT appliances in each location. Each location is naturally on its own subnet:
Location A: 192.168.1.x
Loca...
I have got connected with the QuickVPN to my client.
I can ping the name of my server.
I can ping the ip address of my server.
I can select a previously used UNC path from within Windows Ex...
I have a very strange situation. I will try to be a clear as possible. I have a corporate location and five branch locations. They are connected utilizing VPN's that are managed by a SonicW...
We are in a Windows SBS 2003 Domain enviroment and have implemented VPN for mobile users to acces the domain. I am able to connect to the domain via VPN with all users for the excetpion of 2. ...
I have a few users located off site and they use Cisco VPN to route into my network. They have a Image Class Canon Networked printer on there LAN (192.168.0.xx) and they can print to it, Howev...
