Checkpoint SecureClient NGX R60 HFA 2 - supplement 3 in not installing on my new Vista 64 bit laptop. Is this version compatible to Vista 64bit? If not, what might be a workaround.
Ok so here's the issue. I have a UTM-1 270 NGX R65 with VPN turned on. I am using the certificate method for authentication with the latest Secureclient installed (ver. NGX R60 HFA2 Build 002)...
I have two XP users on my LAN that can successfully authenticate and access a customer's remote network via Checkpoint SecureClient R60. I have tried to install the same client software on th...
Hello,
I want to reset the expert mode password of checkpoint. Is it possible?
Thanks
hi,
i have a checkpoint utm-1 270 r65.
i have 2 seperated networks 192.168.25.0 mask 255.255.255.0 and another network 172.16.1.0
all users and servers sit on the 192.168.25 network.
the ...
Hello Experts,
I have the following situation for which I have not (yet) found a solution.
We have several sites connected with a mesh VPN on checkpoint NGX R65 where we manage the UTM-1 E...
Is there any Checkpoint FW bank available similar to cisco ASA FWSM Module? Currently, we have CPAP-SG272 checkpoint UTM-1, which handled only one..
I am looking to implement OSPF routing on Cisco L3 Switches and Checkpoint NGX R65, I have 2 sites connected via Les Circuit. The idea is to have the routes redistrubite into OSPF to provide ...
I have a CheckPoint Safe@Office 500 firewall. While debugging another problem I find that I can not send packets greater than about 570 bytes. I was testing with packet size of 1200. I can ...
I am finalizing the configuration of a new Check Point UTM-1 270 NGX R65 firewall for a client, and the last thing I need to accomplish prior to installation is to pass traffic from the intern...
Hi,
I have a question. I am thinking about taking the CCNA exam. However, I am finding those Cisco devices are somewhat out dated compared to devices such as the Checkpoint UTM device.
...
I am having a problem with my checkpoint management station. When I run cpstart I get the following error
rand_add_seedfile: Failed to read seed from registry.:not owner
fwrand_write_seed:...
Well folks, up for grabs those delicious 500 points!
We have the following setup SSG140 with a range of external IP's, one of them i have to put on a VIP because i need port 443 pointing to...
1. When setup a Remote Access VPN for CheckPoint Safe@Office 500 firewall, is the VPN Gateway IP the static IP of the firewall or Router's static IP my ISP provided to us, or neither of them?
...
Hi,
Does the CCSA exam over VOIP or QOS, I had recently completed a checkpoint course and the manual covered both QOS and VOIP not sure if it on the exam ?
Hi,
I have a ICMP Rule using the ICMP-Protco. The problem if I run a continous ping on the server during a reboot when the server is unavailable it is returning the IP address of interface...
Currently I have a firewall cluster using checkpoint on splat boxes. The heartbeat network consists of 2 nics each plugged into one switch on a private network vlan.
This seems to me link a...
i am new to checkpoint and want a one to one nat.
ie original 192.168.1.1 nat 10.1.1.1 how would i do this.
Hi
Our admin password for the checkpoint smartdashboard NGX R60 isn't working. Is there a way of changing the password? We have telneted to the firewall ok using the same password that should...
Hello everyone, we have just setup a cluster using NGX-R65, with (2) ip560's, everything works except our vendors that use Radius for authentication, when they connect it tries to go to "qcfw1...
Hi,
I am trying to set-up a Securemote VPN connection however my fw keeps dropping fw1_topo 264 connections.
I have set-up a rule src: All Users@any Dest: Net Internal Net vpn:RemoteA...
I am looking for a program that will perform extensive logs and reporting feature for Checkpoint firewall NGX R65
I had a look at the product below, has anyone used this program or can reco...
I have installed Checkpoint on a SCS Server and reset the SIC, however when I attempt to push a policy to the FW module error "No sufficient licenses installed for "filter".
I have re-gener...
What does it mean if a firewall works in "multicast mode" ??
thanks
Have a network of XP Pro & Vista clients on an AD under Win 2003. I have a HP K5400 OfficeJet attached to network via ethernet. We have 200 users in the AD who use the XP & VISTA clients. ...
