Link to home
Start Free TrialLog in
Avatar of Mitch09
Mitch09

asked on

Usb 2.0 drivers

I have an Asus P4P800 motherboard running on Windows XP Pro with service pak 1 installed. I have the yellow exclamation mark beside Intel 82801EB USB2 Enhanced Host Controller 24DD in the device manager. I can not find a Microsoft Digitally signed driver to enable the USB 2.0.
Avatar of Bartender_1
Bartender_1
Flag of Canada image

Hi Mitch09
Try here:
http://www.asus.com.tw/support/download/item.aspx?ModelName=P4P800
Hope this helps!

:o)

Bartender_1
Mitch09,
The drivers for Win2K should work for you.
(You will have to click on the "all" tab for all of the drivers for the P4P800 and then scroll to the bottom for  the drivers for Windows 20000)

:o)

Bartender_1
Avatar of Mitch09
Mitch09

ASKER

I have an Asus P4P800 motherboard running on Windows XP Pro with service pak 1 installed.I can not find a Microsoft Digitally signed driver to enable the USB 2.0. I have the yellow exclamation mark beside Intel 82801EB USB2 Enhanced Host Controller 24DD in the device manager. .

I installed the driver for windows 2000 and I still have the yellow exclamation mark beside the Intel 82801EB USB2 Enhanced Host Controller 24DD in the device manager. When I check out the driver details It informs me that I do not have a Microsoft compatible driver for C:\windows\system32\drivers\usbehci.sys. All of my other USB devices are Microsoft compatible and working fine. Any other suggestions?
After installing the drivers, did you try removing the device with the yellow exclamation mark, and then rebooting?
If so, what message did it give you whe attempting to install the drivers?

Bartender_1
Avatar of Mitch09

ASKER

After installing the drivers, removing the device and re-booting the found new hardware wizard appeared, the wizard searched then said the file 'usbehci.sys on (Unknown) is needed, I browse to the location of where that file is. I then get the hardware instalation window saying Intel 82801EB USB2 enhanced Host Controller 24DD has not passed windows Logo testing etc.... I continue anyways. It re-asks for the same file again. I locate it once more and select ok. Then I get the cannot start this hardware dialog warning box saying windows cannot initialize the device driver for this hardware (code 37), I then select finish. I still have the yellow exclamation mark.
ASKER CERTIFIED SOLUTION
Avatar of Bartender_1
Bartender_1
Flag of Canada image

Link to home
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
Start Free Trial