Ok, I'm very new with Linux so please be tolerant my somehow ignorant questions.
I recently installed WHAX 3.0 (A distro based on SLAX) on a computer after the request of my boss for a secu...
Hi experts,
I'm new to Debian, but not networking. My linux machine keeps *losing* its ability to route. When I issue the route command, it *occasionally* appears to slow down horribly (abo...
At some point in the past, I had successfully set up two computers (say, jekyl and hyde) to nfs mount each other's shared drives.
I have since tightened security on the two computers, and n...
in my iptraf I can see packets drop in with MAC address ffffffffffff .
Does anybody know what could be the source of them?
Our RedHat 7.2 box will not accept a rsh connection. I can rsh out of it. We need a unix box to rsh in and run a script for faxing. When issuing the command: rsh machine_name it comes back Con...
We are trying to create a monitoring tool webbased.
We have it almost finished but now we want to combine Nagios with SNMP
to read for example our switches etc.
We don't really underst...
I've gotten squid's ntlm authentication with winbind to authenticate users against a single domain but I can't seem to get authentication against multiple domains working. It seems as if winbi...
I have a Ubuntu 7.10 server with 2 NICs acting as the router/firewall for a small LAN connected to a Billion 5200 ADSL2+ DSL "modem". The connection is advertized as 24/3Mbit, the actual negot...
hi
i try to setup new mikrotik server for my network to limit bandwith for each user and limit access to internet using username and password
can any one help me with that
my public address...
Hi, I installed VirtualBox on Ubuntu. I want create interfaces for virtual machine and that can be access from others pc.
How I should create the connection?
I have terminal server 2003 as our server. The workstations are all thin-clients running Damn Small Linux. Users remote into the server using rdesktop.
I have modified the DSL startup scrip...
Our eth0 is our public network and eth1 is private (10.6.2.11). I can ping the ubuntu server from the other 10.0.0.0 IPs, but am unable to ping from our remote office 192.168.5.1. The remote...
I know on Solaris you can use the ndd command to check the NIC for its card and duplex settings, but on Linux how would you go about it? and how would you change the settings? mainly for fedo...
1) In our office we using a Fedora 6 linux server as a dhcp server and xp pro as a workstation. When i access a workstation with system name it showing some error like this as i mention below....
I want to configure a simple share between CentOS 5 ans Windows (XP or Vista).
On CentOS, I have 4 users ua, ub, uc and ud with passwords pa, pb, pc and pd. This PC is named PCTest10.
All ...
I am setting up a number of Linux systems on a Windows network. In the past, I have done this with small networks, where editing the host files on each system was practical. Now I need to co...
When running smbclient I get this error:
tree connection failed: NT_STATUS_BAD_NETWORK_NAME
Can some one tell me what this is and how I would correct it.
My network gateway is Linux box with two NICs, one on the 192.168.x.x range and the other on the 10.100.x.x range. The 192.x.x.x hooks directly to the firewall on the perimeter. The 10.100.x...
Hi,
I would like to know what kernel variables are set when i change the txqueuelen via command "ifconfig eth0 txqueuelen 1000". Also i need some more information on how txqueuelen works i...
Hi experts,
Does anyone know of a way that doesn't cost $10,000 to combine 2+ Internet connections from different ISPs to act as 1 single IP like this device does: http://www.fatpipeinc.com...
Hey guys, I spent a few hours on this one today, and I don't feel like spending the weekend wondering about it too ;-)
One of my programmers has a java communication application that uses M...
Currently using the following rule to route one (1) WAN IP to one (1) LAN IP address: (addresses have been adjusted for security)
/usr/sbin/ip addr add 77.333.207.114/25 dev vlan1 brd +
/u...
We provide T1 access to customers in our building, and one of our clients is requesting 3-5 static IPs. Our traffic is routed through a server running Linux Slackware (used as a firewall). T...
Hi Experts,
I'm trying to do rsh on my machime 'A' from machine 'B'. I do not have any firewall on machine 'A' and also port 514 is open.
when I try to do the rs...
I work in a Netware/SLES/eDirectory environment with Windows XP workstations.
We recently switched from a Netware 6.5 server to a SLES 10 SP1 server with OES2 services installed. This serv...
