Hi ,
I have two machines both in the same subnet. install server is 172.25.135.57 (netegrity) and the client machine is 172.25.135.2 (solloaner8). The solaris cd dump is in /jstart_trial/cd1/...
Recently we set up a sparc with solaris 2.6 and since the first day we had it running I see this at boot up and it is in the /usr/adm/messages log a lot. Here is the message I get: WARNING: IP...
Starting off Bad on a Monday morning...
I have an older 386 based Server running SCO 3.2v5.0.5 and an old application.
The power company shutoff the power to the building without warning...
I am running FreeBSD 6.0-RELEASE with a Supermicro server with onboard Adaptec SCSI, connected to an external Promise sata RAID array (Ultratrak SX-8000)
My server started getting weird and...
I want to install UNIX on an Intel platform using Pentium D processor. Where should I go and how should I go about installing UNIX on this computer. I want to get more experience using UNIX. T...
Hi,
I think it will benefit us in the long run if we have good naming
convention for all the hostnames. I am interested in knowing how other
people name their network nodes, can you get me
...
Hi,
I am using AIX 4.0 on RS6000. Yestersday, I have increase the size of /tmp filesystem for dumping files.
Now, I want to restore the size of /tmp filesystem using smit, but the system doe...
The situation: On a Sparc2 with Solaris 2.5, I am replacing the boot disk which has slice0 root, slice 1 swap, slice 7 data. I ufsdump the root and data partitions, then booted from cdrom in...
I need to have port /dev/tty3 disabled with permissions 666 set permanently but each time the system is rebooted it seems to get reenabled. Is this set permanently in /etc/inittab? (AIX os)o...
Installing Sun OS 2.5.1 on a 30 GB drive. It seems to only want to recognize 8GB's. Any idea on how to get the system to recognize the 30 GB drive?? Keep getting the following error messag...
Hello,
I've set-up the following
AIX 4.3.3 with 2 * 1Gb Fiber channel
|
|
Cisco 4800 Fiber Switch
|
|
SAN
Everything looks OK
Apart from the fact that I see the disks appeari...
I just installed a 6th hard drive (hdisk5) on my AIX 4.3.3 system, but I can't get it configured. Following is a list of instructions I did. What do I do next to get this hard drive on my 'u...
Hello,
I have a Promise Ultra66 card that I am using as a IDE controller (not using RAID features) I have had no luck installing Mandrake, OpenBSD, or FreeBSD. My latest project was FreeB...
Is there a way to change the scrollbar width of a xterm window when running under olwm (Open Look Window Manager)?
I remember that, with Motif, setting the resource
Xterm*scrollBarWidth:NNN
w...
Hello all!
I have a DesignJet 700 hooked up to the network through a JetDirect card.
I am able to telnet to this plotter, as well as retrieve its status using "hpnpadmin" provided by SCO, bu...
How can I monitor the CPU usage and HD/Memory Activities under AIX Unix environment (like WINNT's Task Maanager)?.
I remember that those informance can be shown under X-windows, but how c...
I want to install two instances of accounts software on one hp-unix box.
Example
we have one account software version 6.0 running on Unix box, our goal is to install a new instance of acco...
Hello,
First may i say I am new to this technology, so I hope I have not casued any confusion.
I have a HP Superdome server which is currently set up as an nPar with 4 CPU's and 8GB memo...
Can someone point me to some documentation how to print to a remote lpd server on an aix machine ( AIX v 5.3.0.0)
i have freeBSD
%uname -a
FreeBSD kv_bsd 6.2-RELEASE FreeBSD 6.2-RELEASE #0: Fri Jan 12 10:40:27 UTC 2007 root@dessler.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC i386
%
with wh...
Ok - so I'm in over my head, I think, but I'm all I've got...so any help would be greatly appreciated.
I am running a system with Solaris 9 connected to an EMC Clariion CX500 using PowerPath ...
with cshell, how can I use sed to join two consecutive lines?
Why do I get the following error when I start up metatool?
Discovering drives and slices... hostname: RPC: Program not registered
I'm getting an error when running a program that says "Virtual Memory Exceeded", but when I watch the Solaris swap performance meter, it doesn't move. Does this thing work, or is there anothe...
I have Dell Unix SVR4 running on an Intel machine.
I would like to be able to record everything that's displayed on the system console. The system console is a monitor plugged into the VGA po...
