Lost display resolution and color depth on Compaq Presario 2100.
Win95 Wizard defaults to standard VGA & 16 colors.
Need to restore original without restoring entire system.
Got nowhere with...
I have a a server with 2 80 gig drives. The C partition is only 20 gig. I want move space from one drive to another how can I do this ?
It is a server running windows 2003 server. Or po...
I see on the label of the Harddisk , it said , Cable Select for Master/Slave. Does anyone explain me When should I use this type of setting?
P.S. Sorry if the question is not in the topic I...
Is it possible to reload the win 95 registry without restarting windows?
I need to do this from a script or a program.
This in order for the changes made to the registry by another program to ...
Is it possible to use: regedit <regfile.reg> without getting that dialog box informing that the regfile has been introduced successfully in the registry?
I mean silent mode registry file impo...
Hi, Windows 95 doesn't recognize my network card, and I don't know what kind it is and I don't really feel like opening it again and destroy it (it's old and fragile). Is there any default dri...
I am attempting to install win95 on an old computer but the bootdisk I have doesn't have the cd-rom driver required. I downloaded another one but that too was the same. I don't have the origin...
I installed the windows multilingual cyrillic option, but when i try to write on notepad i get stange characters.
In wordpad it works ok because it sets the cyrillic font automatically.
Can yo...
How I do for install or activate mixer devices?, in the installation of Windows '95 I installed the Control Volume but I can't install the mixer devices
I have a IBM Netvista and on bootup I get a invalid system disk error. It will not go into the recovery program..F11
and it also wont go into cmos at boot up..F1
Any suggestions is greatly a...
The following things went wrong all at once: Add/Remove Programs has disappeared from the Control Panel (double clicking "appwiz" does not restore it), Com Ports 3 and 4 have disappeared and ...
I am setting up Windows 95 OSR/2 on a new hard drive (Maxtor 8.4 GB) I have already partitioned and formatted the drive. I then insert the "CD-Rom Setup Boot Disk", and then run autoexec.bat...
I have a DOS program that is working on an old computer running Windows 95. At some point that computer is going to fail and that will bring big problems so I am trying to bring it to a newer...
I have a windows 95 installation CD. I just bought an older laptop that only has a 3.5 floppy. Can I copy the CD onto 3.5 floppy to install somehow?
I am the Systems Admin. for a bank and need to standardize
date representation across all computing platforms.
I changed the regional settings in Win95 Control Panel to
British date (dd/mm/yy)...
Is it possible to format a 2,5GB disk at it's full cappacity as FAT16.
How can I do this.
What do I need.
When I try to install win95 I get this message "HPFS or NTFS is installed need a dos boot partition to install windows".Is this some sort of compression? what exactly does it stand for,also wh...
Where can I find/download the drivers for the printer Epson Action laser 1500? I've been searching for them in epson.com, epson.de and epson.nz but nothing! Can you plese help me?
I have read everthing you wrote mabo about installing MS OFFICE97. Still I can not do it. I went and downloaded Bdrinfix.exe but I do not know where to put it when I open it up. And you said ...
Where can i find/download the drivers for the epson action laser 1500??
I upgraded my Sony 200MH Pentium computer from 32 to 64 RAM. When I turn the computer on, I get the message: "Memory Size Decreased. Press <F1> for Setup, <ESC> to Boot, <F2> for Option Rom Sc...
When I start my computer in Win95, it restart automaticaly 1 or 2 times after start properly, when I edit bootlog.txt I found an error Failure code is 0016 when the system was loading .ttf fil...
I just installed a new Amptron PM-8400A motherboard with a VXPRO chip set and AWARD BIOS. Also installed 32Meg SDRAM, AMD K6 200, and three MAXDOR IDE hard drives (210 Meg, 340 Meg, and 1.6 G...
I have an application that doesn't print correctly using EMF
spool format. Using RAW is ok, but it'is too slow and takes over the system (prevents multitasking). Since I have some contact wit...
I see on the label of the Harddisk , it said , Cable Select for Master/Slave. Does anyone explain me When should I use this type of setting?
P.S. Sorry if the question is not in the topic I...
