Hello!
we have one cisco 1841 and one Isa 2006.
The setup:
Cisco 1841 - This is our pppoe modem.
WAN IP 193.213.24.32 all traffic to this Ip is forwarded to LAN 192.168.1.2 witch is ...
Hi
I currently have ISA configured in a single uni homed adapter set-up. OWA,OMA are the only services running on the box. This was configured using the following article http://www.isase...
My company is planning to upgrade our ISA firewall 2000 to ISA 2006. We have about 30 policies on this ISA. How can i keep all these policies and migrate them to the new ISA 2006 server?
Do...
HI
I am geting the following error on my alerts in isa server firewall. does this error affects the network.
This error shows up for both lan and wan. i have just given wan error.
ISA S...
Hi,
I've installed ISA Server 2004 standard edition with SP3, I create a new access rule , allowed it, with selected protocols, added FTP, and source is Internal, destination is External for ...
Can you send remote desktop activity through an ISA 2000 server outbound
I have a problem with VOIP calls from behind an ISA Server 2004 instance.
Background details are as follows:-
VOIP hardware: SPA942 handsets registered to SPA9000 PBX. Both of these are loca...
hi,
I have install the isa2004 std addition on one windows 2003 member server, but not able to connect,
the dialer are not responding at the time of verifying the username and password. a...
Hi,
I want to change the DHCP scope for VPN users that acces the network using ISA Server 2006.
They now take addresses in the range of the same subnet for the isa server.
for examole, ...
I have a Windows 2003 SBS with 2 NIcs(Intern and extern) and with ISA 2004 set up as a Back-to-back firewall. ISA 2004 is the back firewall and a NetGear FVS338 is the front firewall. In the F...
I've got 4 new rules that have appeared at the top of my policies that deal with POP, IMAP and RPC.
They were not there last week, the only updates applied was SP1 - I just happened to get in...
Hi, I've got a couple of questions about a secure way of going about this... Just letting you know in advance this is a deep one. Please try to answer everything you can! :-)
I've got a few...
I have Exchange2003 on SBS2003 on one box (MAILSERVER), behind another box with ISA2004 on WInServer2000sp4 (ISASERVER), acting as a firewall.
This config works fine.
However, when I repla...
Hi,
I'm using HttpWebRequest in a VB app with a proxy server. I authenticate OK but I'm getting an error on my ISA server telling me:
"Log type: Web Proxy (Forward). Status: 995 The I/...
