Hi there
I use a 877 Cisco router to connect my home netowrk to the internet. I use IOS 12.4. Knowing absolutely nothing about Cisco devices and stuff, is it possible to setup two seperate DSL dialups on this single router? What I actually want to do is setup one for local traffic access and the other for International traffic access.... and then obviously setup the routing ect..
I have extracted the following out my config :
interface ATM0
no ip address
no ip redirects
no ip unreachables
no ip proxy-arp
ip route-cache flow
no atm ilmi-keepalive
dsl operating-mode auto
!
interface ATM0.1 point-to-point
description $ES_WAN$$FW_OUTSIDE$
pvc 8/35
pppoe-client dial-pool-number 1
!
!
interface Dialer0
description $FW_OUTSIDE$
ip address negotiated
ip access-group 101 in
no ip redirects
no ip unreachables
no ip proxy-arp
ip mtu 1492
ip inspect DEFAULT100 out
ip nat outside
ip virtual-reassembly
encapsulation ppp
ip route-cache flow
dialer pool 1
dialer-group 1
no cdp enable
ppp authentication chap pap callin
ppp chap hostname XXX
ppp chap password XXX
ppp pap sent-username XXX password XXX
Jafar54
Start Free Trial
