I am attempting to configure my Qwest 2Wire 2700HD-G DSL modem/Router so I can remote access my office Windows server? I can't seem to access the proper setup page on the modem/router. Do I ne...
I am trying to configure my network so that I can access my modem. I have Belkin wifi router and a BellSouth Westell 6100 DSL modem in bridged ethernet mode. My internet connection works fine....
Hi
I have a Cisco 2811 Router and have installed a VIC2-4FXO but the command voice-port 0/0/0 is not comming up. Now I have dones some research and it looks like I also need to install PVDM...
Hi there,
i'm having an MTU problem, cannot getting through pakets with size of 1500.
The question is, on a Cisco 878 G.SHDSL which is configured on bridged mode, does it handle the clear ...
I have a CNET wireless G-Router CWR-854 connected to internet through a DSL/cable Modem and it works fine with cabled nework ; this router is also configured to work as an access point forC ...
Basically I want to use the PIX 501 to manage our IP addresses.. have set this up before. Not sure I'm doing something wrong on the netopia router or pix side. Will paste configurations.
...
I tried Start -> Run -> "telnet 192.168.1.1" but didn't work.
Is this the write command for telnet?
My modem IP is 192.168.1.1
Having trouble getting a public IP on the outside interface.
ASA 5505 running 8.0(2)
Westell E90610030-06 DSL box running current firmware.
Service provider is AT&T (Bellsouth)
DSL...
I'm currently trying to set this 837 up and I'm afraid I'm not getting very far. I have tried various sample configs from people using an 837 with my ISP (Zen) as well as configuring from a st...
I have 3 computers which share the cable internet connection. I was wondering if my Cisco Pix 501 will be able to pass 3 dynamically assigned ips to my computers? The ISP will allow me to hav...
Hi,
Yesterday, switched on my windows XP pro laptop as usual. Tried to connect to my BT broadband connection but got an error 721 The remote computer is not responding. Haven't seen this be...
Hi - I inadvertently deleted the network icon on the botton right of the screen. Somehow this removed all my network capability. Now I cannot get any IP Address and when I run ipconfig I ge...
Hi,
We have been sent a SpeedTouch ST546 v6 ADSL modem from a new ADSL supplier.
We already have a firewall so I have asked for multiple fixed IPs to be supplied from the ISP and need to c...
Hello,
Any advice on following will be appreciated.
Configuring CISCO 877W [just bought couples of days ago] for BE broadband [UK based ISP] ADSL 2+
IOS 12.4 in the router.
I have done t...
I have a Linksys Wireless-G Broadband Router WRT54G
Is there a way to throttle the bandwidth on certain connections, so that one of my computers has guarunteed bandwidth? I want my ser...
I am having downloading issues. i use cable internet.
when i am downloading directly , i do not get any speeds and it gets stuck half way during the download and times out. it happens for all...
We have two routers at the small company where I work that we want to use to connect to the a DSL line. Here's the two routers we have:
1)a Netopia R9100 with firmware 4.11. It has one WAN ...
Greetings,
I just switched from a DSL Internet broadband subscription to a cable Internet broadband subscription, and previously I used a D-Link DSL-2640T Wireless ADSL Router to allow wire...
Here is the question that has been running in my mind. Why would someone want a T1 line when they are only providing 1.5 downloads. You can get more out of a comcast business account com paire...
I have this ADSL router http://www.zyxel.com/web/product_family_detail.php?PC1indexflag=20040812093058&CategoryGroupNo=AC5783AE-9475-41AD-BDA5-0997187F44AA and I want to connect it on my ISPs...
We have a Zyxel 642 dsl router on our LAN which simply provides us with access to the internet, it does NOT provide any other bridging functions to remote local networks.
All of the IP's on...
I was using the following setup: ZyXEL Prestige 600 series DSL modem connected to Netgear FS308 switch. Two Dell computers connected to the switch. Everything worked fine. I decided to go ...
hi,
i just finished with a clean install of windows server 2003, but for some reason i can't get internet connections. i tried using the connection wizard->connect using a broadband conne...
Hi Guys,
I have 2x Cisco 857 ADSL Routers. I have 2x sites with ADSL lines installed. Both lines are on dynamic IP addressing. These routers support DYNDNS which are working just fine. ...
I previously asked this question here:
http://www.experts-exchange.com/Operating_Systems/Macintosh/Q_21514868.html
But that was in the Mac section and i think i went a little off topic as ...
