Hi Guys,
I have 2x Cisco 857 ADSL Routers. I have 2x sites with ADSL lines installed. Both lines are on dynamic IP addressing. These routers support DYNDNS which are working just fine. ...
I previously asked this question here:
http://www.experts-exchange.com/Operating_Systems/Macintosh/Q_21514868.html
But that was in the Mac section and i think i went a little off topic as ...
I have a 2Wire SBC Modem with 1 Ethernet port on the back (1070-B Gateway). It connects directly to the PC just fine and I can route on the Internet. The second I switch the ethernet cable f...
Hello - this has been driving me mad for a while now
I am connected to the internet via a Binatone ADSL 2000 Router, which is connected to a BT ADSL Splitter. I decided to replace the binat...
Hi, I have a client that has a problem with her email, I am hosting her email on some outsourced email thing, eveything seems fine for all my clients but she was getting an error sending....
...
We have a Zyxel 642 dsl router on our LAN which simply provides us with access to the internet, it does NOT provide any other bridging functions to remote local networks.
All of the IP's on...
Due to a problem with DSL service in my area I made the switch to a cable modem yesterday. Only after I hooked it up did I realize, sickeningly, that it did not provide the same wifi service ...
I am getting great speed from from cable service. (24mb down / 2mb up) But now I want to split the inbound line to feed some other jacks. I am looking for advice on specs for a splitter that w...
Hello,
Is anyone else having problems creating a remote desktop connection on Windows XP when they are over a comcast cable internet connection?
Thanks.
What is reasonable to expect with regard to a Service Level Agreement from my Internet Service Provider? What would be the ideal way to monitor our bandwidth usage, in order to produce monthl...
I have a Netgear DG634 router-modem, connected to PIPEX Broadband in the UK. As far as I know, I have set it up correctly (PPPoA connection, DNS servers + DHCP automatic, etc) and the connect...
Hello,
my ISP in Moscow, Russia says that he provided me with 50Mbit/s line. but I can't feel this speed at my company . what is the best way to know the real bandwidth I'm really getting fro...
I have a ADSL broadband connection via a Speedtouch Pro Modem. The modem has four ethernet ports but no ATM port, and a static IP address from the ISP. It works fine going outwards through all...
At work we have a simulated cable-modem network. Some of our splitters have "all ports power pass" and some have just one or two ports "power pass". What is the difference between the power pa...
I'm planning to move a computer with DSL away from the phone jack in the wall ( it will no longer reach). I have a DSL filter for the phone cord & the DSL cable. Is there such a thing as an ...
Hello,
I currently have a Netopia Cayman 3346 ADSL modem/router at our corporate office that provides us a connection to the internet. We have a static IP through AT&T. I am trying to use a...
Hello Board,
I am having issues implementing a viable solution for my client to access data located at an offsite location. Here are some of the details.
Network1
Verizon DSL connection...
i have a new computer that i need to connect to a new linksys wireless g router that
is connected to verizon dsl
the dsl router is downstairs with no computer connected to it
and the new ...
I want to VPN to my Sonicwall through my Embarq DSL. Their DSL modem is giving me a 192.168.2.4 IP address. Can anyone tell me what I need to do to get a VPNable address.
I am trying to configure a Cisco 1811 ISO version 12.4 router to do load balancing between two cable modems via Ethernet. I am unsure the best way to go about it and understand if the modems a...
Thank You again!
Netopia 3000 DSL modem from Bell South has desktops hard-wired to it, and it has wireless also.
Have several desktops in nearby room that I want to hard-wire to a D-Link...
I have 3c857 (3com) broadband router, and a user was fired and changed the password. Now I cannot reset the router using the procedure described by 3com: 1. unplug power, 2. disconect all cabl...
I have a Belkin 4port router and a Netgear 8 port switch that I want to use to share and cable modem internet connection with at least 9 computers. I can get the router to work just fine by co...
Comcast has installed a new router along with five static IPs; actually, they call it a "Business IP Gateway", and it's a Netgear model CG814CCRv2. Since I'm getting no help from them, I need...
I need help understanding how to configure my ADSL service. I have used DSL for years, but only with a single static or dynamic IP. Here is my configuration....
I have 2 seperate networks...
