cisco router - SM optical fibre- show commands for checking Optical power tx/rx decibel

Hi,

I am trying to check the following outputs on cisco 7206 and Single mode fibre is connecting to interface gig0/3

can you please anybody let me know what show commands I can use to check the min/max tx and rx power?

Table 1-6 Minimum and Maximum Transmit and Receive Power by Transmission and Optical Fiber Types
 Transmission Type and Optical Fiber Type  Wavelength  Transmit Power
Minimum/Maximum  Receive Power
Minimum/Maximum  
1000BASE-SX
 50-micron1 multimode
 62.5-micron multimode
 
770-860 nm2
770-860 nm
 
-9.5 dBm/-4 dBm3
-9.5 dBm/-4 dBm
 
-17 dBm/0 dBm
-17 dBm/0 dBm
 
1000BASE-LX
 50-micron multimode
 62.5-micron multimode
 10-micron single-mode
 
1270-1355 nm
1270-1355 nm
1270-1355 nm
 
-11.5 dBm/-3 dBm
-11.5 dBm/-3 dBm
-11.5 dBm/-3 dBm
 
-19 dBm/-3 dBm
-19 dBm/-3 dBm
-19 dBm/-3 dBm
 
1000BASE-LH
 10-micron single-mode
 
1280-1350 nm
 
-9.5 dBm/-3 dBm
 
-20 dBm/-3 dBm
 
1000BASE-ZX
 10-micron single-mode
 
1550 nm
 
0 dBm/5.2 dBm
 
-24 dBm/-3 dBm