I used to be able to connect to the vpn at the office from my pc using vista business. I 're-graded' to win xp (after 9 months of frustration with vista) but now can't connect to the vpn. Othe...
I have a shared folder on a SMB2003 server and I would like to map a drive to that folder from my home computer but each time I provide my credentials it comes back asking for my credentials a...
Hi,
Let me draw you my network picture;
2 sites
MPLS network
ASA 5520 on each end
Interfaces on my firewall: "outside" "inside" "WAN" (mpls)
I have my network setup and running fi...
Hello,
Well so far I've worked only on IPSec VPN in ns5gt with the help of GreenBow as a VPN client.Now,i am having two Linksys R...
Hi Experts!
'I think' I need to change my LAN subnet (perhaps at least the last 2 octets of the LAN IP ex: 192.168.x.x).
As i understand, my LAN subnet should be different from the LAN s...
I have installed th Cisco VPN Client on a Windows Vista Ultimate Laptop with Zone Alarm as this was needed to get Cisco VPN Client to run.
I can now connect to the Remote Network however when...
I got a few XP boxes and a few Vista boxes and on the server I want to make it so when a user connects to the VPN it will map a network drive. How could I go about doing this?
I have an OpenVPN 2.0.9 server running on CentOS 5.1 and I have an OpenVPN client running on Windows XP Professional. The XP client has two network interfaces, one public and one private. The ...
We are implementing a cisco vpn solution and what I am wanting our users to be able to do is this.
Go to https://vpn.domain.com
This checks to see if the vpn client is installed
Next the ...
We have setup PPTP VPN using Linksys RV082. Using XP VPN client we setup connection and eveything worked. Got a new laptop and I cannot connect.
below is IPCONFIG
Microsoft Windows XP [V...
OK here's the deal~
I'm setting up a laptop, its an HP/Compaq 6710b, I took it out of the box, repartitioned and formatted the drive to remove all the useless software that was installed on...
I setup a VPN IPSec profile using the ASDM wizard. Everything works fine, I can login and see the internal network, ping internal IP addresses (192.168.0.x) as well as ping off of a DNS name ...
I have a VPN between two sites using PIX 501 firewalls, and I need to test that specific ports are consistently open in order to troubleshoot an issue.
I don't have access to the machines r...
Hi there
I have a DG834 Netgear router which I have configured for VPN end point. I set it as single PC connection rather than end to end as I have installed Pro Safe client on my home PC, th...
I am running a PIX 506E version 6.3(5) on PDM 3.0(4) we are using windows SBS 2003 VPN connector to connect via PPTP to the server. PPTP needs to be forwarded through the PIX to the server. Mo...
I m trying to set up VPN between pix 515 and 1841 router, both sites having fixed public ip address,There seems to be no tunnel establishing between sites ,Previously there was tunnel set up...
I have a VPN tunnel which keeps dropping on one end I have a NS-5GT and on other end NS5XP
My system log show "Phase1 Retransmission limit has been reached"
Not much on google
any help wou...
I have a server that is running DC/DHCP/DNS/CA in my doamin. I also have a windows 2003 setup as VPN server. So far VPN is working. But I am wondering if I need to install IAS server on a sepe...
I am trying to switch my VPN (running on a Cisco PIX 515) over from local authentication to use Radius and authenticate based on an Active Directory Group.
Right now I have not switched o...
Hi,
I have an issue with VPN connection to our company server farm.
One of our servers resides in DMZ zone and serves as application frontend server for OWA (also Exchange proxy for RPC ov...
Hi,
I created a remote access VPN using the VPN wizard on the ASA. It seemed to create fine and I can connect ok to the VPN however I can't access anything on my local LAN at all including ...
Hi i'm having an issue with my Cisco 871.
We have a PPTP VPN server on our LAN and i need to be able to push connectivity to it through the Cisco firewall.
Pushing port 1723 works but i can ...
Is there a security benefit to using "Citrix Access Gateway" over just having users connect through a separate VPN client? For example, if I want my users to be able to use Citrix from their ...
Hi
Several clients VPN onto an SBS server running RRAS, they then connect to a terminal server. This initially works fine, however at random intervals the vpn connection appears to drop. Ev...
I haven't ever set up VPN before but now I have two locations that are both on DSL. I need to connect via two modems. I have one Qwest Moto 3347 and a Action tec M1000. I don't think that will...
