Hi guys,
I'm using cisco ASA 5505 and I'm trying to configure nating between two hosts. I already configured the NAT and I used pinging to make sure that my NAT configuration between two host...
In reference to the network diagram attached, I am facing a problem that even though my remote dial-up client can establish VPN connection (L2PT) to the NETSCREEN SSG-5, it is unable to go bey...
Is there a security benefit to using "Citrix Access Gateway" over just having users connect through a separate VPN client? For example, if I want my users to be able to use Citrix from their ...
Hi
Several clients VPN onto an SBS server running RRAS, they then connect to a terminal server. This initially works fine, however at random intervals the vpn connection appears to drop. Ev...
I am looking to setup a VPN on my Cisco ASA5505, i have tried using the wizzard but it is not working. attached below is my config. I would like to use the ASDM but if not how ever i can get ...
I haven't ever set up VPN before but now I have two locations that are both on DSL. I need to connect via two modems. I have one Qwest Moto 3347 and a Action tec M1000. I don't think that will...
We have ISA Server 2006 in place and have setup RAS and the ISA to successfully work with PPTP. We are trying to get the L2TP/IPSec VPN to work with the certificate that I installed from our C...
I have just completed the custom setup (only have a single NIC with an internal IP) option in Routing and Remote Access to setup VPN on my Windows 2003 Server. As part of the setup process I ...
Hi,
I have an IPSec, site-to-site VPN tunnel between two PIX 515e's. The tunnel itself is working fine.
I have 2 config changes i would like to make, but don't really know how;
1) I ...
My customer is running Windows XP SP2 on a Dell 9100 Desktop connecting to the Internet via roadrunner and a cable modem. He has a CISCO VPN Client version 5.0.00.0340. He had some malware a...
Dear Experts,
I have two offices in two different cities. I want create VPN link for this. I read this link http://openvpn.net/index.php/documentation/howto.html#config
But i do not unde...
Hi,
I have a ASA 5520 (v8.0(3))firewall. I configured a Remote Access IPSec VPN using the Cisco client, and got it working just fine.
I hadn't used it in about a week, then when I went ...
Hi!
I have setup a pptp vpn on a windows server 2003 (Small Business) with help from a guide I found here (!). The server is connected to a Zyxcel Zywall 5 firewall. In zywall (which Im not s...
Is there something else i need to do in order to setup remote access to the web based managment site? Under the setup tab i changed the selection from internal to ANY.
I enter the followi...
I have a SBS 2003 SP2 running RRAS.
It is behind a Netgear FVS318 VPN firewall.
One nic configured, ten PCs on LAN.
I have run VPN wizard on netgear, have also manually forwarded PPTP to...
I've built an IPSec remote access vpn on a Cisco ASA 5510 running 8.0(3) software. Authentication to Active Directory is working fine with LDAP, but the clients get the wrong default gateway ...
Outside Consultant who has a VPN connection to my company is not able to send emails from her company email when connected through VPN . When disconnects from VPN is able to send emails. No ...
Hello,
I need to setup vpn access to my network. I have a Cisco PIX 506e firewall which I plan to pass the vpn connections through to my Windows 2003 R2 server and have it establish and au...
I have Linux guys that need a VPN client for thier Linux desktops. They refuse to use the Cisco VPN client because they do frequent Kernel updates. I am looking for an Open Source VPN client t...
Hi Experts, I have a client that has a 192.168.0\1\2.0 office network and has a problem where when users VPN (using Microsoft VPN) into the office they cannot connect to specific servers, due...
The short version of this question is: Is there a way to set up a VPN firewall rule that does not NAT the clients IP address and instead just passes the client assigned IP address through?
...
Hi,
at the moment we have a Network using a Cisco ASA 5510 as firewall.
Internet
...
Hi,
I have a cisco 1750 router, running 12.3 IOS advanced security.
I need to setup a IPSEC remote access vpn so that clients can dial in to the office.
They will be using the cisco vpn...
We have been eagerly awaiting the release of Juniper's Netscreen Remote Client (the one they purchase from Safenet) with Vista support. We've tried all the Vista compatible releases of the so...
I am having an issue trying to get a VPN working properly between a Linksys RV082 Router and a Juniper NS5GT router. I have got it configured so that the VPN is up and I can ping from the sit...
