I m trying to set up VPN between pix 515 and 1841 router, both sites having fixed public ip address,There seems to be no tunnel establishing between sites ,Previously there was tunnel set up...
I have Linux guys that need a VPN client for thier Linux desktops. They refuse to use the Cisco VPN client because they do frequent Kernel updates. I am looking for an Open Source VPN client t...
i just bought 2 Cisco ASA 5505 devices each located on a different building. the two outside vlan's are connected to a T1 connection and the inside vlan's have their own local network.
i have...
I have a need to connect to two different VPNs at the same time from my home office. I am able to connect to each one, one at a time without a problem but when I try to connect the second the...
Does anyone know how to pass VPN traffic through Vista Home Premium. I have Cisco VPN Client Ver. 5.0.02.0900 installed on my laptop (Vista Home Premium). I can get the vpn to connect, and r...
Hi,
at the moment we have a Network using a Cisco ASA 5510 as firewall.
Internet
...
Hi,
Let me draw you my network picture;
2 sites
MPLS network
ASA 5520 on each end
Interfaces on my firewall: "outside" "inside" "WAN" (mpls)
I have my network setup and running fi...
Issues with VPN to Exchange Server.
From XP Pro I can VPN to the main server, however at that point I do not have access to the LAN through My Computer.
I am Admin.
Is this normal?
I am ab...
Hello,
My ISP is blocking VOIP. I however have found a way around with by subscribing to a paid vpn service and using tap connection. This however requires a pc to which i connect my vonag...
I have a shared folder on a SMB2003 server and I would like to map a drive to that folder from my home computer but each time I provide my credentials it comes back asking for my credentials a...
I have read a number of VPN connection questions here, but must admit I am still a bit confused. Our setup is as follows: We have a Sonicwall 2040 firewall at our main office. I have 5 remo...
I quite often get an error message when accessing a shared network resource such as a mapped network drive when accessing my network from a remote location via VPN.
I have the IP address an...
I have Vista at home and XP at work. I need to connect throug the corporate VPN and get the message that the local pol.icy of this system does not permit me to login in interactively.
I used to be able to connect to the vpn at the office from my pc using vista business. I 're-graded' to win xp (after 9 months of frustration with vista) but now can't connect to the vpn. Othe...
Hey folks.
I've noticed that when you connect to a windows PPTP VPN server, a new virtual adapter is created with a different IP address from my server's "real" IP address.
Is there any ...
I am currently connected via a business Network (AT&T) and have a Dell laptop running wxp sp3 trying to connect to remote VPN. The laptop is not configured to the AT&T Domain, but for the comp...
When I am connected to a VPN, and I have a drive mapped to a folder share on a server across the VPN, which username / password credentials are by used? The login of the local computer? Or the...
I am running a PIX 506E version 6.3(5) on PDM 3.0(4) we are using windows SBS 2003 VPN connector to connect via PPTP to the server. PPTP needs to be forwarded through the PIX to the server. Mo...
i just bought 2 Cisco ASA 5505 devices each located on a different building. the two outside vlan's are connected to a T1 connection and the inside vlan's have their own local network.
i have...
Hi,
I have a cisco 1750 router, running 12.3 IOS advanced security.
I need to setup a IPSEC remote access vpn so that clients can dial in to the office.
They will be using the cisco vpn...
I have two Juniper Firewalls at two different sites and I am trying to setup a policy based VPN between the two networks. The one firewall has alot of VPNs on it, specifically there is alread...
This may get a little complicated so bare with me :)
We have a vpn tunnell setup with 2 linksys routers. Now What I would like to do is program a seperate tunnell using a second router on ...
I have a VPN tunnel between an ASA 5520 and a 5505.
The 5505 is at a customer site and the 5520 is ours. The customer would like to deploy some equipment at our site and they are very speci...
I have set up a vpn server in win2008
However to enable the users to be able to access internet resources I have the use default gateway unchecked for the connection. I have done this because...
I have a server that is running DC/DHCP/DNS/CA in my doamin. I also have a windows 2003 setup as VPN server. So far VPN is working. But I am wondering if I need to install IAS server on a sepe...
