I want to make the Cisco VPN Client (version 5.01.0600) icon appear in the system tray on startup. I have already configured the service to start automatically, and the client is set to start...
Hi,
I have two locations connected by a VPN tunnel. Both ends are running SBS2003 Servers with Dual NIC Cards, boths sites have a D-Link DI-808HV VPN Router connected through a 502-T ADSL ...
Hi I am a novice computer user. Our server is using SBS 2003. We have several offsite computers that connect via VPN and have no issues. I am setting up a new laptop to go offsite. I am trying...
Hi.
I have a site running CentoS (SME Server) that has incoming VPN enabled for certain users and the router is setup to forward all PPTP VPN traffic to that server - which includes GRE 47. I...
Can I create a router-to-router VPN using the 3Com X5?
I have an office in New Orleans and another in Las Vegas.
We want to share all files permanently.
Can we create it and just leave it...
I am trying to get a site-to-site VPN working and have been unable to do so. Working with an admin at another of our sites, we have the tunnel established, but cannot get any traffic across i...
A new client of mine has a SonciWall TZ170 firewall that was setup by their previous IT provider. The internal IP address scheme is a class C 192.168.1.x. I believe the Client VPN was setup ...
Brand new Lenovo R61i
Windows XP2
have just installed the Laptop. have updated XP with newest patches.
Have uninsttalled the pre-installed Symantec Antivirus Corporate edition.
Have cr...
I have a Linksys rv016 router in location A and a PIX515e in Location B.
Location A has one subnet. Location B has three subnets.
I have have a VPN tunnel established between Location A and...
Is there one? If so, how can I get it? I have not been able to find it.
Thank you!!
Troubled
I am having problems setting up an employee at their home using their wireless provider account to get VPN access to our systems. I have set them up exactly as I set up my account (which works...
I have a VPN set up using a Cisco 851 Series router. We're using IPSEC and we're connecting to a main site using a 6 Mbps symmetrical EtherLoop circuit from NuVox Communications. The main si...
Hi folks. Let me preface by saying that I am a Cisco novice (read: know almost nothing) and yet I have been tasked with making the VPN work. I did not configure the PIX. The problem is that...
I just purchased a new Dell XPS 420 with Vista installed. My internet connection works great...but I cannot get my VPN to work. The computer shipped with Norton Internet Security but after try...
We have a cisco pix 501 and use the client vpn feature, not site to site. I set up each laptop at the main office on the lan and put them onto the domain, then ship there pc to them. Each re...
I am going to China this summer. I'd like a cheap VPN that gives me complete encryption for all web browsing. What is an inexpensive VPN service that I can install for a few months?
Also, w...
Hey experts,
I am using Cisco VPN Client, and I am always getting disconnected after four hours.
Is there anyway that I could do to keep connected more than four hours?
I heard that y...
Hi,
I looking at setting up a remote server at my home as a backup in case my servers in my office fail. What is the procedure in doing this? My office has SDSL with static IP addresses a...
Hello,
This is strange. I have 2 subnet connected via a VPN tunnel between two Netopia R910 routers. The DHCP/TFTP server is on a Windows 2003 SBS on Network A. There is a PC on Network B t...
I recently started working for a company that use ISA 2004 as their firewall and allows remote users to VPN into the corporate network. I typically use Cisco PIX or ASA devices for firewalls a...
Hi,
Can anyone point me to any material that shows how to get the Netgear FVG318 VPN working with TheGreenBow VPN client?
Any pointers will be much appreciated.
PS. I've tried using...
Greetings,
I have a client that needs just one user to have remote VPN access to network resources through their ASA 5505. I've blown out the config numerous times and used the ASDM to try ...
I need to be able to connect to more than 1 IP on a network through remote desktop. I have an office with 2 computers and I need to get to both of them but with port forwarding I can only get ...
Hi,
What is the difference between Client for dial up access and Client for VPN access.
Regards
Sharath
On a SBS2003 I have setup for PPTP VPN and it was working fine until I installed a WG Edge x20e Firewall
I have forwarded the ports 1723 TCP and 500 TCP on the Firewall
The Firewall has a bu...
