I setup the Cisco ASA 5505 with the VPN wizard and while it connects from the outside it causes the clients to loose DNS and will not allow them to connect to the server or drive shares. Here ...
Hello,
I have some questions regarding a cisco asa5505 firewall and the asdm GUI software that comes with it. I service mostly small businesses with between 10-20 pc's. Most of these clients ...
I use WinXP VPN client to connect my laptop to my SBS 2003 server, and that works fine. I installed Vista and for some reason the VPN connections I set up under it will not complete the conne...
Running Outlook 2007 on Vista Ultimate (64 bit) laptop. Using VPN to connect to the office. SBS 2003 exchange server. Laptop worked up until about a week ago connecting to the server over V...
I have a Vista home premimum laptop that is not connecting to my XP Pro based VPN the way I need it to.
when connected, the vista machine cannot open a shared folder on the host machine using...
I have a Windows 2003 server set to accept incoming VPN connections. The server is behind a brand new Linksys Wireless-G VPN Broadband router. I am trying to connect remote users to the VPN se...
I work at a large university and bought a Linksys RVO42 router to create a small network off our WAN for a protected network of audio control processors. The max number of users would be 2 go...
The following is our current network infrastructure:
Client PCs > SBS 2003 DC (with DHCP & 2 NICs - one internal on 10.xxx.xxx.xxx and one external to the SonicWall on 192.xxx.xxx.xxx) > Soni...
When i connect the cisco vpn from home to access my company's network on my Vista computer, I can only access the local Lan that the VPN is located. I am unable to access other computers in an...
I cannot remote desktop to my computer at work using the computer name. I create a VPN connection to my work but get a 733 error. I can remote desktop using the IP address of my server, but...
I have configured a remote access VPN connection on a Cisco ASA 5505 using the VPN wizard in the ASDM. I can establish a connection using Cisco VPN client but once connected, I cannot access o...
Through a firmware upgrade I now have the option of using AES-256 on my VPNs instead of 3DES with essentially the same throughput. To take advatage of this upgrade, I need to shuffle around a ...
--Product name: Juniper VPN Client [connecting to Corporate LAN via CAC authentication
--Connecting Client OS: XP Pro SP2, via external DSL [domain member, but should connect off domain also...
I have a Netscreen 5xp at work as a firewall to a 192.168.0.x network. I have a cable modem at home from Time Warner's Road Runner.
If I just use the cable modem alone I can get the Netscr...
Domain users connecting to a Windows SBS 2003 using Microsoft embeded VPN (Windows Vista) can not access shares, other network resources or the internet.
I can ping the SBS server but not a...
I am having a problem accessing the shared drives off of our Server through the VPN. The user logs into their machine, starts the VPN, Re-syncs the machine so its online, and click on the mapp...
I have a windows 2003 network, with a mix of 2003 and 2000 domain controllers, there are branch offices connected to the lan via a VPN, recently this vpn was upgraded from Pick boxes to Cisco ...
We have a VPN between a Cisco 871W to an ASA5100 at partner company that will not build.
We have worked on this for 8 hrs+ and gets seem to get it resolved
Here is the debug and configs
...
I'm trying to connect to a client's network through the Cisco VPN Client which they sent along with the configuration file. My network is behind a Linksys router. I have 2 XP machines (deskto...
I have a user who works from home. His OS is XP SP@ and he uses office 2003. He uses cisco VPN client. when he VPN's into the network he can browses shares ping server but for soem reason he c...
I have a Sonicwall TZ170 that I have used with no issues on a cable connection to create VPN tunnels to my home office. I have switch to FiOs and the new Actiontec MI424 (from what I can tell...
At work we have an SBS2003 Server which is used by a handful of remote access users, 2 of whom run LAN to LAN VPNs (not that I think that is especailly relevant).
I have been trying to conn...
Hi,
I need to configure two routers one in New Orlenas and one in dallas with T1 line. I have the 2 T1 cards they have 2 ethrnet interfaces.
The configuration i found via this web site is ...
Hi!
I am not able to connect to SBS 2003 VPN using my PC and EAP authentication (certificate). This was working just fine some days ago. Maybe installation of Check Point SecuClient did som...
ok, this is the situation.
I need to remotely work on a machine running XP Pro SP2. Remote Desktop is enabled is working fine from the LAN. Whilst doing this I still need to access the loca...
