Hallo,
Actually my problem was good described in the
http://www.experts-exchange.com/Networking/Broadband/VPN/Q_20922615.html
thread. Unfortunately the solution at the end (to upgrade...
Hi,
We have 8 nurseries who each have VPN access to HO office. Each site has a software Sonicwall connection through the Sonicwall TZ170 at HO.
This allows them access to a shared drive and ...
I have read the session listed in "cannot establish connection between FVS318 and Prosafe Client" and have applied suggestions to my own configuration.
I have a curious situation in which, ...
Experts,
I am configuring connection entries for Cisco VPN client 4.8.1 and am wondering if it is ok to leave the "enc_GroupPwd" parameter filled in on the .pcf file for distrobution. Would t...
I have the citrix secure access client v4.2[build 100] installed on my home pc for remote connections to my work pc. There are problems when booting; the client has problems initiating the con...
Running Windows Vista Ultimate, I create a VPN connection - 'Connect to a workplace'. I choose to 'Use my Internet Connection (VPN), and I enter the Internet address and assign a name to the c...
I have a Cisco VPN adapter that disables in Device Manager after Windows Restarts....any Suggestions on this issue
When a user tries to connect using Windows XP, he gets as far as registering computer on the network , then: TCP/IP CP reported error 733: A connection to the remote computer could not be co...
I am trying to get an XP client to connect via VPN to the Netgear FVS338, has anyone had any luck? I can't get the connection to establish. I did manage to get two gateway connections to work ...
I have a PIX 501 with a new software version that I need to configure as a VPN. What would my configuration need to look like?
Thx
BBanis2K
Hi Experts,
We have two offices connected through VPN (bandwidth 1 MBPS), i would like to have video conference through VPN to our other office.
Could anybody advise me any free software...
Hello,
Im trying to set up an IPSec VPN tunnel between a PIX 515 and a Cisco 851 Router. I cant get the tunnel to work. Below is the VPN information from the router and PIX. Am I missing...
PPTP ports are suddenly missing from RRAS. PPTP clients cannot connect. Have already disabled & reconfigured RRAS on server. PPPoE and L2TP will display. Have gone into port configuration & ma...
I just got the Linksys RV042. Thought the QuickVPN would be simple to implement. Alas, it's not. I have upgraded the firmware and done everything Linksys says to do on their (limited) support ...
I'm trying to install Sonic Wall Global VPN Client version 4.0 and I keep getting this error message:
"It appears that you've uninstalled the SonicWall Global VPN client. You need to reboo...
Since upgrading to SP3 ( July 2008) my Microsoft VPN connections have stopped working (Cisco VPN client are OK) - even unistalling SP3 did not seem to clear the problem
Hi,
I use Cisco VPN client to connect to a remote system from my corporate LAN.
In My LAN I get a local IP address (10.40.a.b); the whole LAN is natted outside with a single IP addess (194...
One of the Doctors in our practice uses his laptop at home to retrieve his e-mail while traveling. He has VIsta as his operating system. We use XP in the office and there are many of us that...
Ok, here's one for the experts. It is the generic "error 412 The peer is no longer responding" which is misleading becasue it has never successfully connected.
Windows 2000
Cisco VPN Client ...
We have 4 locations that are linked with Linksys RV042 routers using VPN tunnels between locations. These work OK but we are having trouble routing to certain subnets. The layout is:
Branch...
At my work we load a Netscreen Remote application on the laptops of our remote users so they can connect to our VPN tunnel to our network and access network resources. Just recently I built a...
We have 1 Domanin Controller, MS Server 2008 Standard. We need to set up VPN for remote users, but I don't see Routing and Remote access anywhere on this new platform. Am I missing something...
Good Day..
We are having an issue with DNS records being duplicated in Active directory. Domain controllers are running Windows server 2003.
If a user connects in from home over the VPN th...
Hi guys.
Im an IT consultant that works for firm that has about 25 clients. All the clients use windows VPN (RRAS) for their vpn connections. I looked around but couldnt find any way to c...
I want to connect to a PC Anywhere host using a VPN client (currently a Cisco client). Unfortunately it is not possible to do this with each end having NAT. Apparently IPSec doesn't support ...
