Have xVM virtual box by SUN. Have installed a virtual box running Fedora 9. Need to ssh into said machine from offsite.
Have had this problem before with a debian client, on the same virtua...
I want to block Audio/Video streaming in squid. In my squid config file i have enter this line to block video streaming but it not working user's can able to watch the video on internet.
a...
A very good day to you all,
I have 2 questions regarding nagios:
I'm using nagios to monitor my localnetwork and 1 server on the remote network of a customer. Now I have a question regar...
I am running FC6 on VMWare. Internet access works as I am using a corporate proxy but I cannot get applications that need access to the internet to work. I suspect that I need to configure the...
We have a proxy here, squid 2.6 on a Mandriva box. It performs extremely well for browsing, but it turns out to be a pain in the b.tt when downloading large files. It limits somehow the bandwi...
I have just setup Fedora 9 to replace an old firewall that got blown out in our last set of thunderstorms
I have 2 nics in the box. One connected to the internet and one to the local netwo...
We are trying to create a monitoring tool webbased.
We have it almost finished but now we want to combine Nagios with SNMP
to read for example our switches etc.
We don't really underst...
Hi, I installed VirtualBox on Ubuntu. I want create interfaces for virtual machine and that can be access from others pc.
How I should create the connection?
After install the FC9, and trying to do the yum update got below error
login as: root
root@192.168.0.4's password:
Last login: Wed Jul 16 22:42:04 2008
[root@test ~]# yum update -y
Load...
We have two linux machines running QMail (w/Plesk 8). Each server has 64 IP addresses and hosts many virtual sites. Our problem is that QMail (unless patched) will only send mail out through t...
I've gotten squid's ntlm authentication with winbind to authenticate users against a single domain but I can't seem to get authentication against multiple domains working. It seems as if winbi...
I work in a Netware/SLES/eDirectory environment with Windows XP workstations.
We recently switched from a Netware 6.5 server to a SLES 10 SP1 server with OES2 services installed. This serv...
I am looking into an issue that a co-worker has with a new NIS client setup on a FC9 64 bit install. All files look correct:
[root@autoreg1 ~]# cat /etc/yp.conf
# /etc/yp.conf - ypbind con...
Afternoon
For a good number of years I have been using a script taken from the nano.txt howto with Julian's patches applied. Just recently I started to see a problem on a few in place inst...
I have successfully installed FreeTDS on my LAMP box and now I'm trying to recompile PHP to support the MSSQL functions provided by FreeTDS. I extracted the FreeTDS files to /root/install/free...
I have tried to configure pptpd (poptop) on Centos 5, only to discover when I connected to the server, it locked out everything else (video streaming, subversion, chat). It shut the whole ser...
Specs are:
Intel D945GCLF (http://www.newegg.com/Product/Product.aspx?Item=N82E16813121342)
512mb ram, 128 shared to I.V.
A fresh install of the new Ubuntu. The LAN drivers used were n...
After installing SLES 10 SP2 Upgrade (+ many suggested patches) and reboot the server, it seems that PHP is not running anymore:
php -v or php -i returns a segmentation fault error.
Upgr...
Hi,
Ive been pulling my hair out all weekend trying to setup port forwarding from one of my servers external IP (port 3389) to another servers internal ip address of 10.0.24.1. The 1st se...
I am working on building a Smoothwall Express appliance, and I am trying to use the new Intel Atom processor. I purchased an Intel D945GCLF board with the thoughts that "hey, its an intel boa...
Hello, I'm trying to use iptables to make traffic generated on a host and with destination port 53 (DNS) go through a ppp interface while all other traffic should go to a tunnel interface.
...
A new client used to host their public web site on their Windows SBS server. The have now moved it to a public web host. The internal network still sees the old website on the SBS server.
...
Hello,
I set up an anthentication method with the following architecture:
Client (windows xp or vista ) ==> Cisco switch ==> freeradius (version 2.0.5) ==> winbind ==> Samba ==> active d...
Hello Experts,
I have a diskless machine and having a pxe network card.Is it possible to share a linux kernel throug tftp and enable the pxe network machine to mount that kernel ?The main ta...
where can I find a detailed step-by-step howto for making a linux gateway with the following features :
1- internal pppoe network with freeradius authentication .
2- dialup admin script to c...
