I have two Linux boxes (RedHat 6.0) and this is what I get when I try to use mount command:
mount: RPC: Program not registered
(this happens on one of the machines only) I can mount with t...
Hi experts,
Does anyone know of a way that doesn't cost $10,000 to combine 2+ Internet connections from different ISPs to act as 1 single IP like this device does: http://www.fatpipeinc.com...
I just did apt-get install bind9.
Then i created the master zone file for cggts.com, and its db file.
When I reload, i get the following. (I also cant seem to find the log files for bind)
...
Hi Frenz,
How ru all..hope ya all doing good.
I want some informatin on how to detect which service or program is running on any open port
of a host.I can know which ports ar...
We have a boot to cd network setup incorporateing a hacked Damn Small Linux Live CD. It boots directly from the initial prompt to a Windows RDP login without stopping (no linux GUI seen). We...
I have a computer that is permanently on as a NAS fileserver, and as a printserver.
Ubuntu 9.04 is the OS. The printer is installed correctly. We have several computers, either with Windows ...
I'm trying to install and configure squid as the first step to installing DansGuardian to keep my 13-year-old son out of trouble. I'm doing this on a Red Hat 8 box, and I'm new to Linux.
I'...
I have had a desperate time getting bind9 to work on a debian system. So I have defaulted to using zoneedit.com service - seems to be very good.
My problem at the moment is that if I ;
ns...
I am using Mandrake 2.6.3-15 with a wireless PCMCIA card (a Trendnet TEW-226PC). Harddrake says that it is the following device:
‎RTL8180 Realtek RTL8180 Wireless LAN (Mini-)PCI NIC
...
I have been trying to figure out how to change the port speed of my ethernet adapter from it's current autosensing state of 100 mb/s full-duplex to a 10 mb/s full duplex state. Here is the com...
I currently have a web server configured with Apache, BIND, Postfix, VM-Pop3d and all that wizzwozz and have just successfully got Postfix working correctly with pop-before-smtp (PERL), i'm ha...
I'm having problems to establish a ppp connection with telia( swedish internet provider )
My settings looks like this
------on file to start diling and ppp
#!/bin/sh
tmpfile=/tmp/ppp...
Hi,
I am trying to configure the forwarding of all traffic (udp, tcp) from an internet IP address to a specific LAN IP address behind my DD-WRT v23 SP2 router. As the router runs a cut dow...
Experts:
I"m trying to access my MySQL database that is located on a remote Ubuntu Linux Server. I need to verify that Port 3306 is OPEN and LISTENING on this Linux Server.
I'm trying to...
Hi. I'm trying to use Backtrack 3 on a Dell Latitude D830 which, according to the compatibility list in the offensive security website, runs BT3 without any problems. My wireless card is not r...
I have a server running RedHat Enterprise Linux ES 3.3 and I'm having some problems.
Whenever I try to do a whois from the server, or ping anything outside the server itself, I can't do it...
Friends:
I have setup a Linux firewall using iptables. I am working on allowing VPN connections using Microsoft VPN client from outside my network to a Microsoft VPN server inside my networ...
I have a Fedora core 4 linux box with the /root directory shared to everyone. it is set as visible and I just did a "chmod 777 /root" to it. I want to be able to map the /root directory from...
Hello,
Im using an ipcop firewall and i like to block facebook on this firewall.
the site seems using many ip adresses how can i do to deny acces on this website.
Thanks
WHAT IS THE rh LINUX COMMAND TO STOP AND START A NETWORK.
Hello.
I was wondering if there's a way (I'm sure there is) to run this simple command everytime my Linux router boots up:
ifconfig eth0 hw ether 00:11:22:33:44:55
My ISP has a MAC ba...
I need CVS GUI client for ubuntu linux.
Hello experts ,
i am wondering , i there a command in Linux that i could check if the port is open or closed without using complex tools such as nmap ,
i mean like that : this is just ...
Hi there,
I'm running an iptables gateway firewall with 2 interfaces. I had a port forward rule, which forwards any http traffic
hitting the external interface to an internal webserver. I'...
Hi everyone!
I've a Windows Domain called XXX, this domain uses static IP for its clients. Each workstation in this domain has a name (for example: YYY), as far as I know, this is a NetBIOS...
