I deleted the vswif0 and vswif1 interfaces along with the Vswitch0 and Vswitch1 from my ESX and now unable to connect via VI client. Then I tried creating the vswif0 which gets created but It ...
At some point in the past, I had successfully set up two computers (say, jekyl and hyde) to nfs mount each other's shared drives.
I have since tightened security on the two computers, and n...
Hi folks,
I have one Archlinux VirtualBox (Host) server. I installed two NIC card in my server, for bonding purpose. I need to set up the bond0 interface in bridge mode to share my NIC car...
hi all,
Can we use squid to support SMTP and POP3 also, just like Wingate (Sock proxy). If squid can, how do i configure it, and if it cannot, do we have any alternative (program name pleas...
I am trying to set up a computer to network boot into my existing Ubuntu 7.10 computer using TFTP and NFSROOT. I have tftp-hpa set up using of /srv/tftp/pxelinux.0
The computer is connecti...
I have a Dell PC (one NIC built on the main board). The OS is CentOS 5.x The 2nd NIC is a TrendNet 10/100/1000 PCI based which I added today.
If I plug my CAT-5e cable into either NIC and...
I've been using the Knoppix 5.1 live CD to boot client machines up so that I can make/restore images using partimage by mounting a windows share directory.
The normal commands i've been us...
I have a file server (linux12) running SuSE 9.0. It is serving several disks to about 20 clients.
It was working fine until about 4 weeks ago when occasionally (10 - 20 times per day, on sing...
Hi all
We have several hundred wifi laptops which usually live in a NAT'd wireless-only environment. However for purposes of imaging I need to allocate a block of say 50 addresses on our ma...
Hi Experts,
I have a problem that I have to resolve, I have a bridge on Linux BOX and need to redirect all http traffic to http port on the same machine ( the bridge ) but also need to do s...
I am running CentOS 5.3 on a IBM xSeries 360 with 3 NIC cards. If the 2nd NIC is not being used after an extended period of time, I am seeing that eth1 is disappearing after an extended period...
Ok, I'm very new with Linux so please be tolerant my somehow ignorant questions.
I recently installed WHAX 3.0 (A distro based on SLAX) on a computer after the request of my boss for a secu...
I logged into my linux box this morning to add a new user and it gave me an error.
My command
#useradd myusertest3 -c "User test 3"
and then i get an error:
useradd: unable to lock pas...
Hello VSFTPD EXPERTS!!!
Trying to set vsftpd + PAM for virtual users with different homedirs (every user has it's own homedir - chrooted).
Everythings working ok except automatic homedir c...
Why does my network card disconnect itself?
Hello, I'm running into some issues with our old router and would like to try setting up a machine with Ubuntu and two NIC's to act as a route traffic between two of our subnets (to try and cu...
Hi,
Just want to know if there is a local command that shows me the current inOctets/outOctets on a network interface ? (Linux RedHat 7.0, 8.0)
netstat just shows cummulative traffic...
1) In our office we using a Fedora 6 linux server as a dhcp server and xp pro as a workstation. When i access a workstation with system name it showing some error like this as i mention below....
Dear Experts,
I have a problem..... I config the DHCPD as the following:-
ddns-update-style ad-hoc;
subnet 192.168.0.0 netmask 255.255.248.0
{
option routers ...
I want to block Audio/Video streaming in squid. In my squid config file i have enter this line to block video streaming but it not working user's can able to watch the video on internet.
a...
I thought I've done this correctly but apparently I haven't configured it right. I need to set the gateway for our name server to be an IP address of 10.9.3.254. This is currently what my if...
I created a new folder in my home directory and shared it so that i can access that from my windows machine, but everytime i would try to access the share i.e. //ipaddress/myshare,,, i got a p...
I've inherited a Red Hat PC and I'm a NewB. How can I check the NIC speed and duplex settings? I need to ensure it's Autonegotiate. I think I'm running KDE.
Thanks.
I want to restrict samba access to a linux host from windows hosts. I've put the following in my /etc/hosts.deny:
smbd: ALL
but it still permits connection. What am I doing wrong?
Hey everyone. I've seen a few cases where mail going to certain domains just sits in the queue.
I was trying to send email to someone (not a local address) who i have sent mail to from a di...
