I have just setup a new Fedora Core 4 Linux box with Squid and Dansguard. These are new to me and I have followed what little documentation there is out there for this. after setting the ACL...
I am trying to set up MRTG graphs for some system variables. I have been following a tutorial (http://www.chinalinuxpub.com/doc/www.siliconvalleyccie.com/linux-hn/mrtg.htm). The SNMP service s...
Dear all
I have two dns bind9 server running on RHEL4. One has the master zone configured and the second server has a slave zone on it. The thing is that the slave zone is not updating althou...
I work in a Netware/SLES/eDirectory environment with Windows XP workstations.
We recently switched from a Netware 6.5 server to a SLES 10 SP1 server with OES2 services installed. This serv...
Hi,
Ive been pulling my hair out all weekend trying to setup port forwarding from one of my servers external IP (port 3389) to another servers internal ip address of 10.0.24.1. The 1st se...
I use centos4.2(RHEL4.2). I am a newbie in networking.
When I write : #route add -net 192.168.3.0 netmask 255.255.255.0 gw 192.168.3.4 eth1
Centos answer "SIOCADDRT: Network is unreachable"...
I want to dump tcp packets to/from the localhost.
But tcpdump doesn't see these; it only seems
to see packets that actually go over the wire.
How can I dump packets to/from the localhost?
I'...
Is it possible to create an alias domain with bind9/named? In other words if I have one domain, say test.com, could I create a zone file for test.net, test.org, etc. that would contain everyt...
hello
WinSCP allows my to connect remote server through proxy with setting up proxy server IP 10.0.0.88 and HTTP port 6588. Now i'm in linux and want to do the same. I can access ssh using ...
hi,
I need to get the arp cache (arp table) entry timeout.
arp -a command in console doesn't give me that info.
I checked the arp man and --help , no help there :)
I know its possible...
Dear Experts,
I would be very much appreciated if someone could help me with a project I am planning to do. I want to manage my own DNS server rather then my ISP. Currently I am running Red...
I have fedora 9 on my compaq nc8000 laptop and want to install freebsd 7 as a guest os on virtualbox 2.02, can this be done? or would I have to use vmware esx for this task?
Hi all ...
I've CentOS 5.3 server , when I start squid service I give me an error . I erase squid and reinstall it again but still problem happened .
================================...
whats the command to view the exiting users and groups in ubuntu server
I have a linux computer and a windows computer. Both have 100Mbps network cards and both are configured to be 100Mbps. When I copy files I get a speed of about 2.0 MB / s. Is this normal? ...
I have setup a Fedora Core 4 Linux box to be a mail server. It has a basic install with Postfix 2.2.2 using as you will see SMTP Auth for virtual domains and non system accounts. It sits insid...
First of all I hope this is in the correct forum, if not my apologies.
Here is my situation. I have two boxes running RedHat 8.0. The one box is, for lack of a better term, a database serve...
Hi;
I have setup a HylaFax server and a PostFix server on same Ubuntu server box, I can see that if I send an email like 4162898765@faxoutlookt.company.fax, the PostFix server accept it, al...
Hi.
I have a linux server running Redhat Fedora Core 2. I have a hosts file which looks like the following:
/etc/hosts
10.0.1.2 game1
10.0.1.2 game2
10.0.1.2 game3
10.0.1.3 app1
I...
In wondows there is the -p parameter to make a route persistent (one that you're adding to the local routing table).
What about Linux?
Using this command:
route add -net x.x.x.x/y g...
When I try to transfer a file from windows (98, 2000 pro) using pscp, winscp, or https to a linux server located off-site, the transfer time is about a 3rd of what it should be. If I use scp f...
I am installing the Nagios NRPE check_ide_smart monitor on my remote host system. I have set the suid bit to 4750 and the file, check_ide_smart executes just fine. The problem is that I don'...
I enabled packet forwarding:
net.ipv4.ip_forward = 1 in /etc/sysctl.conf file.
There is a file "ip_forward" which holds a value 1 in:/proc/sys/net/ipv4/ directory.
To restart the network fo...
A very good day to you all,
I have 2 questions regarding nagios:
I'm using nagios to monitor my localnetwork and 1 server on the remote network of a customer. Now I have a question regar...
Ok, here's my scenerio. I have a dedicated box that I am setting up monowall on. The box stats are:
AMD k6 2,
128mb ram,
2 nics; first nic is a 3com (LAN) and the second a Kingston (WAN)...
