[x]
Posted via EE Mobile

Search, ask, and monitor your questions on the go with EE Mobile. Visit Experts Exchange from your mobile device and never be out of touch again.

Question
[x]
Attachment Details
[x]
The Solution Rating System

With so many solutions, how can you tell which solutions are most likely to help you and which ones are not? To provide you with a tool to use, we rate our solutions based on various elements that most accurately determine if a solution is a quality solution. To explain what factors affect the solution rating, here are the elements we take into consideration when formulating our solution rating.

  • The Grade of the Solution
  • The Zone Rank of the Expert Providing the Solution
  • The Number of Author and Expert Comments
  • The Number of Experts Contributing
  • The Feedback of the Community

Your Input Matters
Because of the way the system is set up, the most important variable in this equation is you. As a member of Experts Exchange, you are able to cast your vote on the quality of the solutions in regard to how complete, accurate, helpful and easy to understand each solution is. When you provide your feedback, each rating is adjusted accordingly. So, if you see a solution that has a poor rating that you think is a good solution, let us know by rating it. As you do, the rating will be adjusted and will become more accurate for other members of our site.

If you have any suggestions that you would like to make for our rating system, please ask a question in the Suggestions Zone of Community Support.

Thank you!

8.8

Problem with vpn between Cisco ASA 5510 and Cyberoam CR100i

Asked by pnpking in Miscellaneous Networking, Virtual Private Networking (VPN), Cisco PIX Firewall

Tags: Cisco ASA Firewall, Vpn problem

Hello Experts
I want to configure vpn between Cisco ASA and Cyberoam cr100i firewall. I have Static IP on Cisco ASA site, and dynamic IP on cyberoam site. I have tried to configure as per cisco's static-to dynamic configuration. But dint got success. Cyberoam also supports Dynamic dns, but for asa i am not sure, whether the vpn can be done on dynamic dns or not. My running confiugration is this.

Interfac Details:
Cisco ASA WAN: Static 83.xxx.xxx.146
Cisco ASA LAN: 10.100.1.254/24

Cyberoam WAN: Dynamic (PPPoE)
Cyberoam LAN: 192.168.5.75/24

Vpn configuration done in consideration of Main Mode.

ciscoasa# show run
: Saved
:
ASA Version 7.2(3)
!
hostname ciscoasa
domain-name default.domain.invalid
enable password P@SSWORD encrypted
names
!
interface Vlan1
 nameif inside
 security-level 100
 ip address 10.100.1.254 255.255.255.0
!
interface Vlan2
 nameif outside
 security-level 0
 ip address 83.XXX.XXX.146 255.255.255.240
!
interface Ethernet0/0
 switchport access vlan 2
!
interface Ethernet0/1
!
interface Ethernet0/2
!
interface Ethernet0/3
!
interface Ethernet0/4
!
interface Ethernet0/5
!
interface Ethernet0/6
!
interface Ethernet0/7
!
passwd 2KFQnbNIdI.2KYOU encrypted
boot system disk0:/asa723-k8.bin
ftp mode passive
dns server-group DefaultDNS
 domain-name default.domain.invalid
access-list outside_access_in extended permit tcp any host 83.xxx.xx.147 eq www
inactive
access-list outside_access_in extended permit tcp any host 83.xxx.xx.147 eq ftp-
data
access-list outside_access_in extended permit tcp any host 83.xxx.xx.147 eq ftp
access-list omnixauhvpn_splitTunnelAcl standard permit 10.100.1.0 255.255.255.0
access-list inside_nat0_outbound extended permit ip 10.100.1.0 255.255.255.0 172.16.1.0 255.255.255.224
access-list outside_nat0_outbound extended permit ip 10.100.1.0 255.255.255.0 192.168.5.0 255.255.255.0
access-list outside_1_cryptomap extended permit ip 10.100.1.0 255.255.255.0 192.168.5.0 255.255.255.0
pager lines 24
logging enable
logging asdm informational
mtu inside 1500
mtu outside 1500
ip local pool vpn-pool 172.16.1.1-172.16.1.20 mask 255.255.255.0
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asdm-523.bin
no asdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 0 access-list inside_nat0_outbound
nat (inside) 1 0.0.0.0 0.0.0.0
static (inside,outside) 83.xxx.xx.147 10.100.1.10 netmask 255.255.255.255
access-group outside_access_in in interface outside
route outside 0.0.0.0 0.0.0.0 83.111.50.145 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout uauth 0:05:00 absolute
http server enable
http 172.16.1.0 255.255.255.0 inside
http 10.100.1.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac
crypto ipsec transform-set asatocr_trset esp-des esp-md5-hmac
crypto dynamic-map outside_dyn_map 20 set pfs
crypto dynamic-map outside_dyn_map 20 set transform-set ESP-DES-MD5
crypto dynamic-map asatocr_dmap 19 set transform-set asatocr_trset
crypto map outside_map 1 match address outside_1_cryptomap
crypto map outside_map 1 set pfs
crypto map outside_map 1 set peer 217.165.128.65
crypto map outside_map 1 set transform-set ESP-DES-MD5
crypto map outside_map 65535 ipsec-isakmp dynamic outside_dyn_map
crypto map maptocr 2 ipsec-isakmp dynamic asatocr_dmap
crypto map maptocr interface outside
crypto isakmp identity address
crypto isakmp enable outside
crypto isakmp policy 10
 authentication pre-share
 encryption des
 hash md5
 group 2
 lifetime 86400
crypto isakmp policy 13
 authentication pre-share
 encryption des
 hash md5
 group 2
 lifetime 3600
crypto isakmp nat-traversal  20
telnet 10.100.1.0 255.255.255.0 inside
telnet timeout 5
ssh timeout 5
console timeout 0
management-access inside
dhcp-client client-id interface inside
dhcpd auto_config outside
!

!
class-map inspection_default
 match default-inspection-traffic
!
!
policy-map type inspect dns preset_dns_map
 parameters
  message-length maximum 512
policy-map global_policy
 class inspection_default
  inspect dns preset_dns_map
  inspect ftp
  inspect h323 h225
  inspect h323 ras
  inspect rsh
  inspect rtsp
  inspect esmtp
  inspect sqlnet
  inspect skinny
  inspect sunrpc
  inspect xdmcp
  inspect sip
  inspect netbios
  inspect tftp
!
service-policy global_policy global
group-policy omnixauhvpn internal
group-policy omnixauhvpn attributes
 dns-server value 10.100.1.10
 vpn-tunnel-protocol IPSec
 split-tunnel-policy tunnelspecified
 split-tunnel-network-list value omnixauhvpn_splitTunnelAcl
 default-domain value gsis.omnix.ae

USERS INFO DELETED


tunnel-group DefaultRAGroup ipsec-attributes
 pre-shared-key *
tunnel-group omnixauhvpn type ipsec-ra
tunnel-group omnixauhvpn general-attributes
 address-pool vpn-pool
 default-group-policy omnixauhvpn
tunnel-group omnixauhvpn ipsec-attributes
 pre-shared-key *
tunnel-group promedia.gotdns.com type ipsec-l2l
tunnel-group promedia.gotdns.com ipsec-attributes
 pre-shared-key *
tunnel-group 86.98.10.177 type ipsec-l2l
tunnel-group 86.98.10.177 ipsec-attributes
 pre-shared-key *
tunnel-group 86.98.66.132 type ipsec-l2l
tunnel-group 86.98.66.132 ipsec-attributes
 pre-shared-key *
prompt hostname context
Cryptochecksum:5084c0025700ebb0eabd8010385cab6b
: end
ciscoasa#

And my debug output:

ciscoasa(config)# May 13 01:20:14 [IKEv1]: IP = 86.98.66.132, Received encrypted
 packet with no matching SA, dropping
May 13 01:20:16 [IKEv1]: IP = 86.98.66.132, Received encrypted packet with no ma
tching SA, dropping
May 13 01:20:26 [IKEv1]: IP = 86.98.66.132, Received encrypted packet with no ma
tching SA, dropping
May 13 01:20:46 [IKEv1]: IP = 86.98.66.132, Received encrypted packet with no ma
tching SA, dropping
May 13 01:20:54 [IKEv1]: IP = 86.98.66.132, Received encrypted packet with no ma
tching SA, dropping
May 13 01:21:03 [IKEv1]: IP = 86.98.66.132, Received encrypted packet with no ma
tching SA, dropping

I have gone through following link,
http://www.cisco.com/en/US/products/ps6120/products_tech_note09186a00807e0aca.shtml
But not found success, i hav tried many other configuration like changing sequence number of dynamic map and other stuffs.

I have tried this link for sonicwall to cisco connectivity with main mode and aggressive mode.
http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a008052c9d4.shtml#configs

but still problem remains exists.

And one more thing i would like to add, myASA does not support 3DES-AES encryption.

If any body have idea about configuration between Cyberoam-Cisco using dynamic dns, then also welcomed.

Any help would be appreciated.

Thanks in advance.

mudresh
 
Loading Advertisement...
 
[+][-]05/13/09 05:00 AM, ID: 24373699Accepted Solution

View this solution now by starting your 30-day free trial. Setting up your free trial is quick, easy, and secure. We will return you to this solution, unlocked, when you're done.

About this solution

Zones: Miscellaneous Networking, Virtual Private Networking (VPN), Cisco PIX Firewall
Tags: Cisco ASA Firewall, Vpn problem
Sign Up Now!
Solution Provided By: ksims1129
Participating Experts: 1
Solution Grade: A
 
[+][-]05/13/09 11:37 PM, ID: 24382176Author Comment

Often, when Experts are collaborating with members who have asked questions, they will request additional information about the problem. Askers respond with an author comment like this one.

Start your 30-day free trial to view this Author Comment or ask the Experts your question.

 
[+][-]05/13/09 11:47 PM, ID: 24382214Author Comment

Often, when Experts are collaborating with members who have asked questions, they will request additional information about the problem. Askers respond with an author comment like this one.

Start your 30-day free trial to view this Author Comment or ask the Experts your question.

 
[+][-]05/14/09 12:25 AM, ID: 24382364Author Comment

Often, when Experts are collaborating with members who have asked questions, they will request additional information about the problem. Askers respond with an author comment like this one.

Start your 30-day free trial to view this Author Comment or ask the Experts your question.

 
[+][-]05/14/09 05:05 AM, ID: 24383899Expert Comment

At Experts Exchange, members can ask their questions to thousands of technology professionals, also known as Experts. Experts compete and collaborate to answer those questions by leaving comments like this one.

Start your 30-day free trial to view this Expert Comment or ask the Experts your question.

 
[+][-]05/14/09 05:38 AM, ID: 24384206Author Comment

Often, when Experts are collaborating with members who have asked questions, they will request additional information about the problem. Askers respond with an author comment like this one.

Start your 30-day free trial to view this Author Comment or ask the Experts your question.

 
[+][-]05/14/09 05:41 AM, ID: 24384233Expert Comment

At Experts Exchange, members can ask their questions to thousands of technology professionals, also known as Experts. Experts compete and collaborate to answer those questions by leaving comments like this one.

Start your 30-day free trial to view this Expert Comment or ask the Experts your question.

 
 
Loading Advertisement...
20091118-EE-VQP-93 - Hierarchy / EE_QW_3_20080625