Hello everyone,I want to create 2 entirely seperate networks from 1 dsl connection with a dynamic IP. One network for work and one for play.
the 2 linksys routers I have are and old 802.11...
Wireles LAN
I have a Vaio VGN-A317M with Windows XP home edition.
I have a problem with connecting it with my home wireless network.
Some info:
- I have a Belkin_Pre-N_334074 wireles...
i am on a windows xp workstation, and i am unable to open a file i download. When i try to unzip it, it reads " error reading header after processing 0 entries".
The files looks like it do...
I have a device connected to a Catalyst 4006. When i set the port to vlan 60 the connection is fine and never is intermittent. Although, when i change the port to vlan 100, the device loses co...
I have TIVO connected to the network according to the instructions on the tivo website. Now I need to know how to access it from my computer. Take into consideration that I don't know how to n...
My understanding of this is that a mail sender should first try to use the server with the highest priority, and only go on to the next if the first one fails.
But looking at our incoming ma...
Hey all,
I'm shopping around for bandwidth and have decided to go with two - two bonded T1's. I'm thinking with the cutover though, it might be a good time to look at our router setup - si...
My main use for the internet at home is porn, online games, news, porn (in that order) so ping is VERY important me for and my online games.
In about 2 weeks iam going to be moving in with ...
I have a Belkin 54G router. My computer have WINXP pro installed.
One day, FTP stoped working, I thought that it was because I installed WIN XP SP2. I did extended research on google, and I...
In safe mode with networking I can get my browser/email to work(using netscape 7.1).
I am having problems ing problemgetting email and webpages....
Original problem started with using 80...
I would like to know about the NT Authority\System account. Because sometimes on the server I can see on the field " Last Logged on By" the NT Authority\System
and just below it MydomainNam...
I have a Toshiba Software Modem (Agrere) that came with my Tecra M1. Worked fine for about a year but now it doesn't work. I re-installed the drivers. However, when I query the modem in con...
Windows cannot obtain the domain controller for your computer network.
This is the message I get in event viewer. I have already tried to manually put in the IP addresses of the preferred D...
I have a computer running on a DSL connection
Its a sprint DSL modem and Earthlink is the provider
A phone cord runs from the modem to the wall jack
A patch cable runs from the modem to ...
I cannot connect remotely to any Windows 2000 Terminal Servers. However, unfortunately I am not familiar with Cisco routers. The router was installed and configured by our ISP.
I don't kno...
I for get, when in cmd window you could do say.... PING <ip>
Then if the first one came back timed out you could hit CTRL <??> to stop it and return to the prompt so you didnt have to w...
Hey all, I'm using a Mac Os X (darwin unix) gateway. It is set up as a dhcp server. However, if I set one of the machines internally (windows xp) and I specify its static ip address... will ...
When I try accessing either yahoo.com or google.com, I get a listing of their Apache server file structure but not the web site. I can ping both web sites by name and IP addresses fine. I have...
Hi,
We have just installed a USB Jetdirect box which is attached to a HP 850c Printer.
All was working fine, but now as soon as you insert paper into the printer and turn it on it prints...
hai all
1.can anyone please tell how to configure leased line dlink router for 64k
router how to check the connection and how to configure router. and what
is the difference between l3 s...
I need to disable port 139 but when I go under TCP/IP properties, the checkbox to disable NetBIOS is disabled. How can I disable this port?
Hi,
I am currently experiencing EXTREME difficulties with my dial-up modem, and would be grateful for some advice on how to proceed.
The modem is currently a 56k PCI Modem based on the S...
Hi,
I currently have a laptop Benq joybook 8000 with NTL cable modem connected to Benq AWL500 wireless transmitter.
I cannot access the router admin area. I have set the IP to the default, ...
Hi I have a Linksys WRV54G Router fitted with a high gain antenna, and wish to extend the signal range further; I am struggling to find a repeater that will do the job.
Linksys have produce...
At first, when I had the wrong ip 192.168.100.23 instead of 192.168.0.23 which then matched the remote network, I was able to ping the server but unable to connect to the server. I then chang...
