I meant to access my router at 192.168.1.1. Instead I typed 198.162.1.1 into my browser accidentally. A login screen comes up, similar to my router login (and every other login page), but it m...
We have Internet Bandwidth of 2 Mbps for our compnay but every now and then the internet bandwidth gets chocked and either we need to restart the firewall or router.
We need a good mon...
I am looking for a software program to monitor per-computer internet usage behind an ICS configuration.
I am using an ISP which requires me to connect my modem to a single computer, not a r...
I have an Hp Ip kvm that I cannot find on our local network. I am sure it has an IP address but I have absolutely no clue what that could be or what network it could be on (ie 192.168.1.0/24, ...
1.) Internet
have a 30mbps pipe to Internet and have a report from the provider that in a 5 minute time span:
5 minute input rate 9320000 bits/sec, 939 packets/sec
5 minute output rate 191...
Hi,
I'm looking for a free or cheap Network Monitor tool thats easy to use.
I just really want to resolve computer names against IP address so I can VNC into that PC.
Many Thanks
# of Georgraphic Locations: 3
Distance apart: >5km.
Location # 1
Game Server: 1
Client Computers: 14
Location # 2
Game Server: 0
Client Computers: 14
Location # 3
Game Ser...
I have a point to point T1, after rebooting equipment and basic connectivity troubleshooting, I am getting no more than about 20K up and down through my point to point T1 connected by Cisco 16...
In the past I used a freely available product called netbench. It was perfect for what I needed. Unfortunatly I no longer have the copy that I had and am looking for a good substitute. Or if ...
Hi,
Could anyone explain to me or provide some information/links that can provide me with the use of command "Tracert" & "Route print". Please also provide me with the explanations on how ...
hi i am soon going to setup a wireless network internet connection at home to share with my close neighbors...I am hoping that their is a software that would enable me to control or limit the ...
How can I find out what websites users on the network is visiting without any intrusive client-side software? Something that can record user's IP address and what site they accessed.
Or if ...
I've been playing a few days with the Microsoft Network Monitor tool, and it is really interesting.
I'm doing this just for fun, in my local home network.
Initially, I thought this was a net...
hello all,
I have a question with regards to routing.
we have a small network of 200 nodes (192.168.4.0/24) and its also VLANd across to another network using a Layer 3 sw. (192.168.5.0/...
Hello Experts!
I have a customer with a server at a colo. The colo is saying that the server is going over its allotted bandwidth. I ran wireshark for 24 hours and the results were lower th...
Hi Experts,
Is anyone aware of a network opensource monitoring software? Something similar to Orion from Solarwinds.
Any freeware utility will be a lot better to avoid any licensing problem...
Good day,
I've been given the task of tracking how much bandwidth we are using in and out of our LAN. We are using stacked Cisco 3750 switches.
So I'm planning to configure a port on a ...
I have a cisco 3725 router and cisco SDM 2.5. On the interface status I have a box that says "Bandwidth Usage" and it has a bar chart next to it and a percent next to that. This is not the s...
I am looking to monitor traffic speed between 2 points through multiple gateways to determine where a bottleneck might be occurring.
Question:
I have a 2 computerd at a 2 remote sites that has client software install. It send new data to the server at the main campus and pulls existing data. Now when the client is set ...
Hi,
I would like to find out what applications or what servers use up my bandwidth.
I have very slow internet connections from time to time and I want to identify the problem.
I want a comp...
We have 3 T1 lines. Recently, our Internet access is slow. My boss wants to know who are ths heavy users and what they do. Any good software?
In Squid cache proxy, I want to know how much of the outgoing http requests have been satisfied by the cache. in fact how much traffic/bandwidth is saved in scale of size during a time period ...
Hello,
How can I monitor only the Web Traffic (remote tcp 80/443) passing through a cisco 1841 router?
I've What'sUp Gold ver 8. Can i see that traffic with the graph ?
I just only want t...
I have a watchguard Firebox X1000. I have the ability to see how many Kbps are going OUT, coming in, coming in on IMAP Port and going out on SMTP and such. I can also use the hostWatch to see ...
