hello all,
I have a question with regards to routing.
we have a small network of 200 nodes (192.168.4.0/24) and its also VLANd across to another network using a Layer 3 sw. (192.168.5.0/24) "Dont ask my why its like this, its shorty going to be ripped out and replaced with a (192.168.10.0/31)"
All traffic to the outside world is routed to a single 10mbps router (Cisco 2610) on the 192.168.5 which is the Default Gateway.. This gateway also redirects all (.4.0/24) traffic back to the layer 3. to see the correct network.
My question is.. " all that traffic routed back to the (.4.0/24) network, will that have a maximum through put of 10mbps? does all the traffic route back through that router.. "
I'm guessing it does, but just wanted to check before I rip it out.
Start Free Trial
