Where can I find a stencil set (.vss file) for Visio 2007 containing all the basic non-model-specific Cisco symbols?
I have two deferent ISPs , ISP 1 is the main and high speed connection. ISP two is DSL connection
and it's functioning as backup link.
in ASA firewall I already configure Static Route track...
My network, inherited from earlier support person, has a 191.100.x.x scheme on LAN. It works fine with Public ip's provided by ISP. Can I continue using this scheme?
We leased a new space last week for more of our employees. It is about a mile away will be connected via fiber with a dedicated 3MB connection through our ISP.
We currently have a Windows ...
I am familiar with OSPF but not too familiar with BGP, i am making the question here so an expert can give me a run down answer without going into the nitty and gritty without me having to Goo...
I already Have build my network infrastructure in the main office including the following Internet Protocol:
1- IP address (Server) .............. 172.16.0.2
2- Subnet Mask ...................
I'm having an issue with routing between 2 subnets (10.79.136.0/24 and 192.168.91.0/24) on the same network segment. I attached a file that illistrates what I'm trying to do. I'm trying to t...
Basically I have one Cisco ASA 5510. I would like to integrate it in my Network. Below I will summerise the basic config of my network.
* One Cisco 3845 Router with integrated firewall capa...
i have L2 switch configured with 7 vlans
i want to use microsoft ISA to do routing between vlans
my question is, is this possible? If possible
do we need 2nic in ISA and 2 nics to connected...
I have configured the users and all is fine there... however when I place the script in the sysvol/domain/scripts folder and log the person who has the script in ther profile properties.. it d...
Hi,
I am looking for a Network Security Policy Template for Data Centers?
I just added a network 10.1.1.0/24 to a BGP process in R2 to advertise the network to R3. But it does not advertise the new route to the neighbor R3. I clear ip bgp 10.5.5.1 soft out and it st...
I I have a Windows 2003 AD network that is running slow as molasses. The servers are not being taxed in any way shape or form. Here is the setup.
I have three buildings about 600 feet...
I have a Cisco AIRAP1231G-A-K9 with virtual access points setup. One SSID for our employees, and one for our customers. I am attempting to apply an ACL on the VLAN that the customer SSID is as...
I need a little advice on some network design. Here's my current situation.
I have two suites within the same building. Currently the two suites are connected with a fiber cable between s...
Please see attached image to help you understand what's going on.
There are 4 buildings, each with a switch. 2 Of the buildings have fiber between them with gigabit speeds. The other 2 bu...
Hi,
I am going over subnetting and i am just little confused on something. From what i learnt a rule 2n-2 where n is number of bits depending on requirements. So for example 192.168.22.0/26 ...
Hi, i need to create a stack composed by 5 WS-C2960G-48TC-L V03 using their GE SFP, LC connector SX transceiver. I have already connected the fibers (i'm attacching the connection schema), we ...
I'm looking for reference material (web/text) to help with my networking course.
The perfect reference walks through a typical commercial (>100 users, multiple wiring closets and geographi...
i am setting up a domain control, its ip is going to be 172.16.56.9
and i have a small network of computers 10.0.5.x
how can i add those computers onto that domain controler without changi...
I will be bringing two remote locations online in the next couple months with DS3s for the WAN links between sites. I am contemplating my options for handling network traffic between these si...
We recently acquired a 2nd warehouse 2 miles down the block from the existing one. 50 of the 120 employees are going to be moving into that space each with a pc and ip connection. Currently we...
I need to know if a Cisco switch will connect to a Alcatel switch when using their respective 10Gbase-ER XFPs.
As far as I can see they use the same wave length (1550nm), both work up to 40...
I am seeking advice as part of a fundamental assesment of how we store files on our WAN.
The scenario is:
200 Site / 1000 user WAN - currently all sites are connected to one main site wh...
We are looking for a solution that use Cisco netflows to protect against DDOS atacks. Our customer does does not have netflow enabled in their routers so he cannot tell the total number of net...
