We are experiencing a very strange problem on our network; every day exactly between 10-10:30AM, our network speed including Internet speed slows down. We have a 1.5M T1 line that slows down t...
can i get primary domain controller to sync time over internet
OK, I have a network with several vlans each vlan has its own subnet in our one dhcp server, The switches are cisco 3500 series and they are connected to a cisco 6006 via fiber. I understand t...
Scenario
Main Connection - Connected to a local ISP with a public IP range of 128 Public addresses that are redistributed but a CISCO router DHCP service
Users - Stand Alone Internet on ea...
I have a server managing the DHCP and the network is having difficulty obtaining automatic IP Addresses because it seems to bond to the Cisco Swich before it reaches the server. Can this be d...
Hello all,
I'm completely new to building ACLs on a Catalyst switch. That said, I have experience doing so on the PIX platform so I have some understanding of concepts, etc.
Here is wha...
What are the ramification to raising the Forest Functional Level from Windows 2000 to Windows 2003? I only have Windows 2003 servers. Is this change immediate? I understand I cannot change ...
I have a Cisco 6509 with a Sup720 and 12.2(33) loaded. I am trying to setup a simple Monitor Session to do some troubleshooting on another issue, but it is only forwarding Broadcast traffic. T...
I have a windows 2000 server in one location and I would like to log into a server in a different site over the web - is there some piece of software that will allow me to do that - I would ra...
Hi.
I initially had a problem trying to access this PC at all from my laptop over the wireless network, but after tons of searching, I found an answer. Now my problem is that if I try open ...
Having a very annoying issue with Orion Network Performance Monitor. I've been on the phone with both Dell and Orion and this is where I'm at right now:
Created a custom MIB Poller using O...
On Windows 2003 server AD we have disabled access to the control panel (in user policies\administrative templates\control panel. Now for 1 PC I want to give back access to the control panel....
I'd like to export MAC address and ARP data from Cisco and/or 3Com switches/routers into a database to create an IP to port mapping. I'd like to be able to automate the export via some typ...
What is the most proper reason to have multiple loopback interfaces configured for a single device, preferably in routing ?
