September 6, 2008 08:46pm pdt

1. uetian1707 44,343
2. lrmoore 43,090
3. JFrederic... 32,400
4. from_exp 32,327
5. donjohnston 30,075
6. batry_boy 21,900
7. mikebernh... 16,000
8. RobWill 13,375
9. kdearing 12,900
10. Chris-Dent 12,500
11. harbor235 12,250
12. _jesper_ 10,946
13. that1guy15 10,389
14. giltjr 10,075
15. 2PiFL 10,000
16. elf_bin 9,940
17. jburgaard 9,900
18. hbustan 8,890
19. KCTS 8,768
20. tigermatt 8,607
21. RPPreacher 8,400
22. ryansoto 8,350
23. DevilWAH 8,130
24. decoleur 6,800
25. trinak96 6,700
25. Melaleuca 6,700

1. lrmoore 234,392
2. donjohnston 103,098
3. JFrederic... 81,240
4. pseudocy... 77,030
5. uetian1707 55,800
6. giltjr 39,792
7. batry_boy 35,810
8. from_exp 35,257
9. RobWill 34,287
10. harbor235 32,526
11. mikebernh... 29,600
12. jburgaard 27,150
13. Freya28 23,136
14. RPPreacher 21,788
15. Jim_Coyne 20,550
16. grblades 20,463
17. tvman_od 19,450
18. rsivanandan 19,439
19. Frabble 19,202
20. _jesper_ 18,882
21. Chris-Dent 18,189
22. trinak96 17,650
23. yasirirfan 17,390
24. KCTS 15,120
25. that1guy15 15,069

07.04.2007 at 08:40PM PDT, ID: 22676074

	[x] Attachment Details

Cisco 3560 Switch clock setting went back to default after reload

Asked by mohai in Network Operations, Network Switches & Hubs

Tags: cisco, 3560, clock, switch, set

Any one has encountered problem with clock set of Cisco 3560 Switch? I have 2 Cisco 3560 switches with model type and IOS version as below:

Cisco IOS Software, C3560 Software (C3560-IPBASE-M), Version 12.2(25)SEB4, RELEASE SOFTWARE (fc1)

The problem is that after I did the clock set, write mem and reload the switch, the clock setting just went back to factory default.

Will it be the battery issue? Pls helpStart Free Trial

Keywords: Cisco 3560 Switch clock setting we…

	Title
1	Reset Cisco 1841 to factory defaults
2	Cisco 1721 IOS upgrade
3	Cisco Factory Defaults
4	CISCO SWITCH IOS HELP!!!
5	Cisco Router IOS upgrade
6	SNMP on Cisco Switch

Loading Advertisement...

20080716-EE-VQP-32

Cisco 3560 Switch clock setting went back to default after reload

Asked by mohai in Network Operations, Network Switches & Hubs

Tags: cisco, 3560, clock, switch, set

About this solution